fx hardware esterno

Scope project files

Moderators: valis, garyb

Post Reply
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

fx hardware esterno

Post by nunziata »

How do i connect the fx hardware module in the routing project ?
lexicon pcm 91
tc 2000 electronics
tube tech cla 2 compressor

Is it possible to make these connections using the aux mixer.
tank you
User avatar
Fede
Posts: 300
Joined: Sat May 05, 2001 4:00 pm
Location: Genoa, Italy

Re: fx hardware esterno

Post by Fede »

the external effects modules can be assigned to i/o present in your project (sw: asio, wave.., hd: adat, spdif, analog), you do this by opening the ext-fx module's surface and choosing the i/o you need.

Ciao
Fede
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: fx hardware esterno

Post by dawman »

AES/EBU of the PCM91 shows up as SP/DIF as the selection though. Confusing, but none the less true.

BTW, some nice weapons ya' got there Brotha' Man. :wink:
Last edited by dawman on Fri Nov 21, 2008 11:52 am, edited 2 times in total.
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

Re: fx hardware esterno

Post by nunziata »

but i connect
lexicon pcm 91
tc 2000 electronics
tube tech cla 2 compressor and if possible
2 drawner noise gate 201.
this is problem.........
send me a project for understand better.
thank
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: fx hardware esterno

Post by dawman »

Effects / Others / External Effect........................Assign I/O's.

Use as an insert into the AUX of a mixer.

______________________________________________________________________________

Option 2 /

Effects / Others / External Effect S. Directly send a synth into the Inputs, Outputs to Mixer.

______________________________________________________________________________

Option 3 /

Effects / Others / External Effect S / Attach to the Returns and Sends of a STM1632.

______________________________________________________________________________
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

Re: fx hardware esterno

Post by nunziata »

But project noooooooo |||||||||
send me a project
is better
thank you
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: fx hardware esterno

Post by dawman »

Effetti / altri / effetto esterno S........................Assegni I/O.

Usi come un inserto nell'AUX di un mescolatore.

_________________________________________________________

Scelta 2 /


gli Effetti / Altri / Effetto Esterno S. Direttamente spedisca un synth nei Contributi, Produzioni a Mescolatore.

_________________________________________________________

Scelta 3 /


gli effetti / altri / effetto esterno S / leghi al ritorna e spedisce di un STM1632.

_________________________________________________________


Io ho attualmente nessuna ferramenta o il progetto per mostrarLa. Lei avrà leggere il manuale e sperimentare con le scelte su. :D

Ciao.
Last edited by dawman on Tue Nov 04, 2008 7:08 pm, edited 1 time in total.
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

Re: fx hardware esterno

Post by nunziata »

grazie comunque .................. ciao
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: fx hardware esterno

Post by dawman »

I suoni di PCM91 bello in Scopo, una decisione più saggia.

:wink:
User avatar
t_tangent
Posts: 970
Joined: Sun Dec 28, 2003 4:00 pm
Location: UK

Re: fx hardware esterno

Post by t_tangent »

Capiche ? :)
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: fx hardware esterno

Post by dawman »

My Great Uncle Ninzio Cucuru ( R.I.P. ) came to me in a vision, and said you must help Nunziata, as we both have troubles expalaining ourselves. :roll:

I sold my hardware effects and can't create a jpeg. until I find a suitable replacement for the PCM91. There's only one choice......The Bricasti Model 7. The problem is that I am far from wealthy, and must get a second XITE-1 first, as the XITE-1's generate income. The Bricasti M7 is a luxury that must wait for a couple of months. It's the same cost as an XITE-1.

I shall proudly display it on New Years Eve. ................... :D :wink:
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

voui joke? ' Who is your uncle?

Post by nunziata »

no problem if what you say it shows with photos
maybe Project
thank you
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

Re: fx hardware esterno

Post by nunziata »

Attualmente questo è il progetto, ma non sono felice con il suono ricevo, credo che con il Cubase ASIO per sfruttare l'hardware esterno non è la scelta giusta. Per non parlare di utilizzare il convertitore di 16 macchine ultra tech, come tubi e UAD 2-610, forse dovrei collegare direttamente ai microfoni e poi andare in convertitore 16 ultra .. sarebbe meglio così
cosa ne pensi?
the sound you get is not...
Attachments
progetto scope.GIF
progetto scope.GIF (138.19 KiB) Viewed 12545 times
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

Re: fx hardware esterno

Post by nunziata »

this is workflow cable studio
Attachments
WORKFLOW complete.gif
WORKFLOW complete.gif (246.46 KiB) Viewed 12529 times
nunziata
Posts: 212
Joined: Mon Feb 18, 2008 7:37 am

Re: fx hardware esternal

Post by nunziata »

This is currently the project, but are not happy with the sound I get, I believe that with the Cubase ASIO to exploit the external hardware is not the right choice. To say nothing of using the converter 16 ultra tech machines, such as pipes and UAD 2-610, maybe I should connect directly to the microphones and then go to converter 16 ultra .. would be better that way
What do you think?
Post Reply