Page 1 of 1

b2003 midi cc

Posted: Tue Oct 01, 2019 4:05 pm
by yayajohn
device doesn't seem to be reponding to cc data? (verified cc data with midi monitor and another scope synth so I'm really puzzled)
Is this a Scope 7 thing? I don't remember any problems before.

Win 7 64bit Scope 7

Re: b2003 midi cc

Posted: Tue Oct 01, 2019 5:09 pm
by yayajohn
:oops: Nevermind, CC data was being sent out on channel 2.

Re: b2003 midi cc

Posted: Tue Oct 01, 2019 6:20 pm
by garyb
:D

Re: b2003 midi cc

Posted: Tue Oct 01, 2019 10:26 pm
by dawman
Dont forget to use Sharcs BCM Patch or SpaceFs CC2X2 to gang drawbars on to an expression pedal.

Re: b2003 midi cc

Posted: Wed Oct 02, 2019 2:39 am
by yayajohn
:wink: yeah I remember the phoncon long ago for Mehdi's CC devices, going to get that going here with my new controller. Haven't tried the BCM yet. Thanks I'll look for that.

Re: b2003 midi cc

Posted: Thu Oct 10, 2019 6:13 am
by Bud Weiser
dawman wrote: Tue Oct 01, 2019 10:26 pm Dont forget to use Sharcs BCM Patch or SpaceFs CC2X2 to gang drawbars on to an expression pedal.
You now often mention a "Meris Hedra"-pedal in other posts when it came to gang/control drawbars or other devices parameters.
What is that pedal ?

I googled and found FX stomp boxes only.

:)

Bud

Re: b2003 midi cc

Posted: Thu Oct 10, 2019 10:04 am
by David

Re: b2003 midi cc

Posted: Thu Oct 10, 2019 3:44 pm
by dawman
Its a killer Triple voice Pitch Shifter and Delay and its mother SHARC DSP 48k unit with amazing quality.


C0BA29CC-FB51-4141-8F02-472CD4BC292A.jpeg
C0BA29CC-FB51-4141-8F02-472CD4BC292A.jpeg (3.62 MiB) Viewed 3925 times

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 4:35 am
by Bud Weiser
David wrote: Thu Oct 10, 2019 10:04 am https://www.meris.us/product/hedra-pedal/
Thank you !

Now I see, it´s really a FX stomp box and not a special secret wapon (expression type) pedal.

:)

Bud

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 4:50 am
by Bud Weiser
dawman wrote: Thu Oct 10, 2019 3:44 pm Its a killer Triple voice Pitch Shifter and Delay and its mother SHARC DSP 48k unit with amazing quality.
great pic !
You obviously put that "meris" sticker on the pedal board,- so at a 1st glance, I thought there must have been some top secret MIDI pedal connected you use for all kind of pre-programmed MIDI CCs stored in presets and being available on demand.
Sorry for mistake ... :lol:

You might remember MOOG had that, meanwhile discontinued, pedal, allowing to deal w/ pre-programmed multiple CVs on separate outputs simultaneously etc..
I always thought that should work for multiple MIDI CCs transmitted on different MIDI channels and w/ individual offsets and ranges too.
Something like a MIDI processor dealing w/ a single pedal.
Dunno if such toy ever existed though.

But I now understand you do that w/ spaceF device(s) inside SCOPE.

:)

Bud

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 5:36 am
by dawman
The Source Audio Relflex Pedal I have does everything in CV and MIDI.
E4042957-B2D7-4139-B674-B552105079B1.jpeg
E4042957-B2D7-4139-B674-B552105079B1.jpeg (5.87 MiB) Viewed 3880 times
8BEB86BD-290B-4AEE-8316-77D1CDB73145.jpeg
8BEB86BD-290B-4AEE-8316-77D1CDB73145.jpeg (5.59 MiB) Viewed 3880 times
3618A514-6349-4864-8035-5C21E98DA1F2.jpeg
3618A514-6349-4864-8035-5C21E98DA1F2.jpeg (6.41 MiB) Viewed 3880 times

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 6:51 am
by valis
And it does KEURIG!

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 3:52 pm
by Bud Weiser
dawman wrote: Fri Oct 11, 2019 5:36 am The Source Audio Relflex Pedal I have does everything in CV and MIDI.
I googled and investigated manufacturer´s website ... very interesting.

But meanwhile, it seems to be not manufactured anymore and is sold out/unavailable here.

:)

Bud

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 3:54 pm
by Bud Weiser
valis wrote: Fri Oct 11, 2019 6:51 am And it does KEURIG!
Whatever that means ...
I have no clue !

:)

Bud

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 8:17 pm
by garyb
it's a kind of coffee machine...

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 9:23 pm
by David
valis wrote: Fri Oct 11, 2019 6:51 am And it does KEURIG!
The variation in grout colour suggests more gets spilt when using the pedal for coffee!

Re: b2003 midi cc

Posted: Fri Oct 11, 2019 10:33 pm
by valis
Look behind the pedal in his shots, it wasn't that big of a stretch folks. lol

Re: b2003 midi cc

Posted: Sun Dec 15, 2019 7:58 pm
by yayajohn
Bud Weiser wrote: Thu Oct 10, 2019 6:13 am
dawman wrote: Tue Oct 01, 2019 10:26 pm Dont forget to use Sharcs BCM Patch or SpaceFs CC2X2 to gang drawbars on to an expression pedal.
You now often mention a "Meris Hedra"-pedal in other posts when it came to gang/control drawbars or other devices parameters.
What is that pedal ?

I googled and found FX stomp boxes only.

:)

Bud
Well dawman, I've been trying to ignore you since you've mentioned this pedal several times and i finally broke down and checked it out
https://www.youtube.com/watch?v=YwvySH0YjYI This is the guy that got me to buy the KMA Horizont.
Damn you! Now there's another one on my list! I'm going to need another ADAT box.
(MIDI through the expression jack is weird though)