Scope hardware is not recognized on Windows Startup

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
User avatar
ARCADIOS
Posts: 1339
Joined: Tue Aug 02, 2005 4:00 pm
Location: Glyfada, Athens-Greece
Contact:

Scope hardware is not recognized on Windows Startup

Post by ARCADIOS »

Hi

After Installing a fresh windows 10 installation on an SSD, the booting is now much faster than normal HHD, but scope hardware is not seen at first boot.
Looks like I have to wait more than 10, 20 seconds to launch scope.exe.

If I launch Scope.exe with windows startup.. I get error.... "No Scope hardware"

Any Ideas on this?
User avatar
Marco
Posts: 1260
Joined: Thu Oct 10, 2013 4:27 pm
Location: Ödenwald

Re: Scope hardware is not recognized on Windows Startup

Post by Marco »

Contact problems
:wink: out and about for music production. Are you still configguring your Studio :lol: music first!
User avatar
ARCADIOS
Posts: 1339
Joined: Tue Aug 02, 2005 4:00 pm
Location: Glyfada, Athens-Greece
Contact:

Re: Scope hardware is not recognized on Windows Startup

Post by ARCADIOS »

PCI board contacts?
User avatar
t_tangent
Posts: 970
Joined: Sun Dec 28, 2003 4:00 pm
Location: UK

Re: Scope hardware is not recognized on Windows Startup

Post by t_tangent »

Do not let Scope auto start when ŵindows starts. Disable that and start manually.

I had the same issue before when first setting up Scope 7 64bit on Win 7 64bit on an SSD drive.

My guess is windows needs to complete loading drivers and other processes so then when you start Scope manually shortly after it should work fine.

Hope that helps
User avatar
Marco
Posts: 1260
Joined: Thu Oct 10, 2013 4:27 pm
Location: Ödenwald

Re: Scope hardware is not recognized on Windows Startup

Post by Marco »

Have you installed the latest chipset driver for your mainboard?
Clean the pci contacts with a Rubber! Nothing else.
:wink: out and about for music production. Are you still configguring your Studio :lol: music first!
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Scope hardware is not recognized on Windows Startup

Post by garyb »

yes, don't autostart.
User avatar
valis
Posts: 7306
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: Scope hardware is not recognized on Windows Startup

Post by valis »

Might as well clean the contacts too =]
Post Reply