PlanetZ forums - scopeusers.com

I'm refering to : https://dnbradio.com/set/46729
The synth in question is at 58:20

Great song at 58:00 !
What's that dark sounding synth ?

Did I get this right ?
After the offer ends, all Xite-1 users can download the beta and get involved ?
(I own two Xites (operational and spare), and can't buy an other one, as my wife would probably kill me )

within scope: allocated channel, z-link to DSP7. all working, but after save and reload just silence. loaded in sdk: the allocated channel and Z-link report (0,6) the functional channel and z-link report (0,9) and (0,0) Now I set DSPId 10 for the allocated channel and I get (0,10) Then i set 0 to th...

Not to mix this topic into other discussions, I just share my observations here: On my last post, I wrote some text, uploaded some pictures and pressed "preview". An error in plain text occured with something like the site being down. Of course I had to remember my writings, as they were l...

So here comes the DSP-location measurement (thnX for you howto): A) working project, no manual allocation: channel = (0,9) Z-link = (0,0) B) same project, after manual allocation of one channel and upper Z-link dest to DSP 8 channel = (0,7) z-link = (0,7) Setting DSPId allowed me to change the chann...

@yayajohn: My issue in not related to load. I can do wild dsp allocations without loosing sound within a project. But on reload, the sound is gone and requires strange actions to get it back. I just tried this in my project shown above: Allocating the upper 4 channel elements and the upper Z-Dest to...

So here comes the "howto repeat": Using noise from controlroom goes through mixer, is then spread to a bunch of channel-elements. Channel element connected to Z-link1-78 is connected to speakers. Everythink works. Now I assign the (shifted) channel-element to dsp7, the sound disappears. No...

Is there any trick how to keep scope7 from running dump reallocation algo on load ? The need for manual assignment occured when using the channel element within a larger project. (30% load of xite) Obviously the auto allocation failed, thus I got an "cannot route..dsp to dsp" error, which ...

That article was the reason why I chose DSP7.
But why is the project silent after save and reload ?

If I place my mixer on output different to Z-link, I get interconnect errors. If I force the same DSP, it doesn't work after reloading.

My projects tend to be big ones, so I sometimes face a dsp routing error on my xite. This can be solved by assigning some devices to a certain dsp. I assigned z-link ins and outs with a patchpannel to use DSP7 and it worked for hours. After reloading the saved project, there is no sound. I have to d...

In scope, we talk about latency of milliseconds, whereas the pci bus clocks with steps of 30ns. (.. there's µs in between :) ) Latency is not a topic of the bus, but of software at driver level. The throughput/bandwidth of an expansion will half, if the adapter requires an extra 30ns cycle somewhere...

That's one reason, why I quit cubase
But from my old days I remember, that the dongle had its own piece of software to be installed.
Do you have evidence, that the dongle (and its drivers) is installed completely ?

What latency settings did you use with the cards plugged into the Magma boxes? Did you have any issues with lower buffer size settings? Regarding the power question-the pulsar and scope cards need the old floppy drive power cable style connector plugging into the IO board-do the magma boxes have su...

I have two magma expanders. One with 3 slots and one with 13 slots. The card on the pc-side can either be pci or pcie. I tried scope in the 13 slot and an old pulsar in the 3 slot-version, both worked. The 3 slot came with its on powersupply and case, but not sure if a 15 dsp would fit there. the 13...

DFI also offers pci, like this with 5 pci slots:
https://www.dfi.com/de/product/index/1606

Nevertheless, those pci-expanders also worked for me (using magma brand). The number of masterverbs was 50% of that of the mainboard, but in my usecase not a limitation.

Just to mention from my side:
I love BigmixerV2, because of the perfect overview.
Unfortunately, the risk of distorsion is higher compared to modern mixers.

I tried that before, but its outputs are Xor, but I want to run my speakers in parallel, too.

Wow ! I never realised that direct outs in dynamic mixer.
Works perfect !

Here's a picture of the section, which causes the trouble. I can assign all 3 channel to DSP 7 , which makes it work. But when doing so on bigger projects, I get errors on reloading, although the project worked at saving. Is there an other device doing the same job ? Is there a way to see, what DSP ...