PlanetZ forums - scopeusers.com

Thanks Budweiser. Someone mentioned that their Noah has the same display problem but the Noah works fine anyway via the remote editor. Yes,- and YOU bought it to use it standalone,- like me. In fact, I´m already pi##ed I have to use the editor for "Prophet5" all the time ´cause this damn ...

Alignment isn’t a concern like it was in the XP era. It means that’s where the partition starts. Keep in mind OEM systems will have a partition supported by BIOS operations to wipe and reinstall Windows, this is separate from the MS Recovery image and will take you back to the state the machine shi...

I just purchased a NoahEX ... I bought this to have a standalone unit that simply works ,not to run around going down rabbit holes . I fear you´d have to ! Once you got your Win XP laptop, install the latest Noah remote Editor (v1.1) and try to read out your keyfile. Save it when that worked. Also ...

Well, thx for reply/advise ! I understand a fresh Windows install might be the best solution,- but NOW I´d have to do this on 2 machines meanwhile. the screenshot above isf rom my office desktop machine. On my Lenovo laptop #1 , running Win10 Pro x64 too, there are TWO recovery partitions. :roll: :-...

Hi Valis ! Thx for input,- here it is ... Bud W_Diskpart drive1.jpg On my office machine, "recovery" is partition #1 The "start/boot" partition called "system" is partition #2 "reserved" is partition #3 C: Windows is "primary" partition #4 IMO, the r...

Hi Valis ! Just only to be sure: Which partition/volume to shrink ? Win10 Pro x64_system drive.PNG On my machine, " diskpart " lists the 529MB partition #1 on drive #1 as "WinRE" (recovery partition). Partition #2 is the 99MB partition called "system" ... but then there...

valis wrote: ↑Fri Jan 12, 2024 5:25 am No because you need to tag this partition with a specific GUID when making it, and the commands aren’t hard as given. Just make sure you don’t have two recovery partitions or it may still fail due to the smaller one.

Good to know !!!
Thank you !



Bud

Thanks a lot Valis ! I hope I´m able to follow your instructions and fix the problem. Using "command line" isn´t what I´m usually doin´,- but I´ll try carefully. I still have a bit of experience w/ diskpart ... I wonder if I can use Minitool Partition Wizzard free for that purpose too and ...

Well, I got this message and tried everything I´ve found in the web according this Windows update failure and a fix,- but no change. Win10 Pro 22H2 update error code 0x80070643 .jpg Am I the only one ? Error code: 0x80070643 Any idea? Is it possibly Win Privacy or OOshutup10 related ? It´s the 1st t...

I would help when I owned a tablet or smartphone,- but I don´t,- sorry!

With my metal zone pedal i have used the phono out from xite and the mic inputs to return the signal. I guess you mean the XITE´s "phones" output. So, when you do, you use the ANALOG volume control of that (stereo-)output and the analog gain controls of the DI-board as well. Currently I h...

... I don't want to go into a debate, but I feel that setting levels inside xite or after it, is more or less the same (the signal is just lower)... My assumption above came from theory "when lowering volume in digital world it reduces the bitrate". So when working p.ex. in 16Bit and redu...

... reamping stuff to send to analog distortion pedals ... With the A16, I do not know if balanced jacks will work, but with Xite, you can do the following. it is known tricks, but now it is tested on Xite. The A16Ultra works w/ "balanced" cables,- TRS-(Out) to TRS/ XLR,- or to TS (unbala...

Thank you all,-

merry x-mas and enjoy nice holidays !

all the best



Bud

... scope is not recognized ... windows 10 64bit. Any ideas please? Wait for the new driver,- should be available "soon". It was announced beginning this year already,- but then something came in in between refusing Windows driver signing. Use Scope "standalone" until ASIO works...

@ Gary and Valis,-

thx for the info,- good to know !



Bud

valis wrote: ↑Fri Dec 15, 2023 5:39 pm Voltage can be determined by the slot keying:

https://www.ni.com/en/support/documenta ... ility.html

Thx Valis,- great info.

But what about realtime data throughput of PCI-to-PCIe bridged PCI slots being connected to the Intel chipset?



Bud

https://www.asrockind.com/en-gb/IMB-1713 I investigated a bit more. On this mobo, the PCI slots use AS Media ASM1085 PCI-to-PCIe bridge IC connected to the Intel PCH H610 chipset. At least, each slot delivers 25W max.. AFAIK you´d need native (not PCI-to PCIe bridged) PCI slots delivering 5V curren...

distance is too far for ADAT? you can go like 50ft and if that's not enough, just add a repeater(it's possible to go much further without a repeater, but...). i have gone over 150ft with no issues. you can go much farther than that. I bought a couple of these for cheap ... https://appsys.ch/en/prod...

Ok then i won't fiddle with it any further. Why ? Your original demand was " to sync an Xite z-link to a PCI Z-link " ... no ? No word about bi-directional (audio-)data traffic between both workstations and via Z-Link. I can imagine "sync" and "data traffic" in one dir...