Search found 552 matches

by lagoausente
Mon Dec 28, 2015 11:20 am
Forum: Purchasing and Trading
Topic: Sampler Akai Z4 1 GB Ram with adat card,
Replies: 0
Views: 1145

Sampler Akai Z4 1 GB Ram with adat card,

I have been Scope user for long time, I got tired waiting for Sts sampler work with no memory limit and 64 bit problems I got and bought one Akai Z4. It´s upgraded with 1Gb of Ram and has and adat card for free routing 8 digital channels. Also has usb, allow control all the unit from the computer, m...
by lagoausente
Sat Sep 06, 2014 9:18 am
Forum: Purchasing and Trading
Topic: Project 6dsp 5.1+ Virtuavia atx expresscard adapter+Dynatube
Replies: 3
Views: 871

Re: Project 6dsp 5.1+ Virtuavia atx expresscard adapter+Dyna

Price drop, 400 euro for the bundle shipped to EU. (have to check shipping cost if you are in other country). Onlly Dynatube costs 184, eur Only the Atx pci-expresscard adapter costs 299 (have added the pico psu). (Prefer not sell separately, but equivalent prices should be aprox 250 for the card pl...
by lagoausente
Thu Sep 04, 2014 8:49 am
Forum: Purchasing and Trading
Topic: Project 6dsp 5.1+ Virtuavia atx expresscard adapter+Dynatube
Replies: 3
Views: 871

Project 6dsp 5.1+ Virtuavia atx expresscard adapter+Dynatube

I´m selling my 6 dsp scope project Aes/Ebu version with Scope 5.1 software, includes Dynatube: Also selling also this Virtuavia 4 slots Pci-expresscard adapter. It´s the Atx version, with Pico psu included, so you can put more cards on it without psu problems of the other virtuavia models. Includes ...
by lagoausente
Fri Jun 21, 2013 2:24 am
Forum: General Scope Discussion
Topic: Asio Position Protocol on Scope?
Replies: 3
Views: 642

Re: Asio Position Protocol on Scope?

Update, It works fine with Cubase SX2 and Sx3, have tested it yesterday at night, not works with Cubase 5. Have to load also Vdat, link both VRC-S and Vdat with clk out/in, and use Asio 2 device on Scope, send from clko to clki of Asio and voila, it syncs perfectly on Sx2 and Sx3. As the VRC-S manua...
by lagoausente
Thu Jun 20, 2013 2:39 pm
Forum: General Scope Discussion
Topic: Asio Position Protocol on Scope?
Replies: 3
Views: 642

Re: Asio Position Protocol on Scope?

mm, I was trying it with cubase, using VRC and Vdat in Scope 5.0. When touch locate, cubase goes to position but doesn´t obey stop, play etc. So I guess, this happened also with Scope 4.0? Or is a bug on the actual version of Scope? I suppose that is not Cubase bug itself or it is? I want to sync Cu...
by lagoausente
Thu Jun 20, 2013 6:00 am
Forum: General Scope Discussion
Topic: Asio Position Protocol on Scope?
Replies: 3
Views: 642

Asio Position Protocol on Scope?

Hello everybody, I have a 6 dsp card with scope 5.0. I also have a AW4416 and a hardware sequencer QY700. I sync the AW4416 to the QY700 and it´s reliable, but I´m thinking about doing the same with the pc but I don´t trust much on midi precision on Pcs, so I looking for alternatives. There is the I...
by lagoausente
Fri Aug 31, 2012 9:53 am
Forum: Purchasing and Trading
Topic: Magma chassis 2 slot pcmcia.
Replies: 3
Views: 701

Re: Magma chassis 2 slot pcmcia.

Slot 3 has no space on this case, it´s a known issue on this magma models. I never tested slot 3, but I think it works the same as the other two. I suppose magma maybe used the same mainboard for 3 slot versions with diferent case, don´t know, google must have the reply. I remember have read on the ...
by lagoausente
Mon Aug 13, 2012 3:52 am
Forum: Purchasing and Trading
Topic: Magma chassis 2 slot pcmcia.
Replies: 3
Views: 701

Re: Magma chassis 2 slot pcmcia.

Upload some pics.
by lagoausente
Sun Aug 12, 2012 2:25 pm
Forum: Purchasing and Trading
Topic: Magma chassis 2 slot pcmcia.
Replies: 3
Views: 701

Magma chassis 2 slot pcmcia.

I don´t use it anymore pcmcia. The unit works fine, I removed the fans because only used a 3dsp card and a picopsu power supply. I still have the fans and the original power supply around so I can ship with it, because have the picopsu with the Virtuavia one (the one that supports ATX and more power...
by lagoausente
Sat Apr 28, 2012 11:10 am
Forum: General Scope Discussion
Topic: Simple question about 2xAdat 16ch recording and clock sync.
Replies: 4
Views: 442

Re: Simple question about 2xAdat 16ch recording and clock sy

Ok, depending on the use will master one or the other. Even the Yamaha two cards... work as one as master clock? I suppose yes but on the manual is and example using the wordclock output so that was my doubt..
Thanks in advance.
by lagoausente
Sat Apr 28, 2012 5:02 am
Forum: General Scope Discussion
Topic: Simple question about 2xAdat 16ch recording and clock sync.
Replies: 4
Views: 442

Simple question about 2xAdat 16ch recording and clock sync.

Sorry if the question is too obvious, but I´m not sure about this issue: Have, Scope with 2x8 adat Yamaha Aw4416 workstation with 2xadat (amplied with slot options). Question is to record 16chanel Adat in both directions. On the Yamaha can select external sync from ch 1-2 of slot 1, or 3-4 slot1, et...
by lagoausente
Sun Apr 08, 2012 4:13 pm
Forum: General Scope Discussion
Topic: Two cards together with diferent Scope versions?
Replies: 7
Views: 417

Re: Two cards together with diferent Scope versions?

Ok, thanks a lot. Ralf still work on SC or is another Ralf?
by lagoausente
Sun Apr 08, 2012 3:22 pm
Forum: General Scope Discussion
Topic: Two cards together with diferent Scope versions?
Replies: 7
Views: 417

Re: Two cards together with diferent Scope versions?

Sorry I didn't explain if correctly. Have 1-one 6dps card with 5.0 no extra plugins. 2- one pulsar 1 4 dsp with extra plugins. 3- Thinking of possible get another 6 dsp card with 4.0. (Not sure yet). My main computer is a laptop with the virtuavia expresscard-pci adapter inside a rack. I'm no sure i...
by lagoausente
Sun Apr 08, 2012 2:25 pm
Forum: General Scope Discussion
Topic: Two cards together with diferent Scope versions?
Replies: 7
Views: 417

Re: Two cards together with diferent Scope versions?

Thanks Gary. I Thought had to pay for having the keys on the other card. I both cards already have 5.0 can get the keys for the other card for free? Both need same keys for the same plugins to work together?
Thanks in advance.
by lagoausente
Sun Apr 08, 2012 11:34 am
Forum: General Scope Discussion
Topic: Two cards together with diferent Scope versions?
Replies: 7
Views: 417

Two cards together with diferent Scope versions?

A simple question, if have two 6 dsp cards, one with Scope 5.0 and the other with Scope 4.0 should they run together in the same computer with Scope 5.0? Or should need both updated?
Thanks very much.
by lagoausente
Thu Sep 15, 2011 11:11 am
Forum: Purchasing and Trading
Topic: Probably selling Scope Pro Plus, upgraded to 5.1 (sold)
Replies: 1
Views: 389

Re: Probably selling Scope Pro Plus, upgraded to 5.1

The card is sold, thanks very much.
by lagoausente
Thu Sep 15, 2011 11:04 am
Forum: Purchasing and Trading
Topic: Probably selling Scope Pro Plus, upgraded to 5.1 (sold)
Replies: 1
Views: 389

Probably selling Scope Pro Plus, upgraded to 5.1 (sold)

Itm not 100% sure if will sell the card but probably yes, I really use most of the time Native samplers, and dont get advantage of the dsp. Its a great studio, but I really dont have the time to work with it, so all the posibilities it has stoles me more time then advantages. I will receive very soo...