power supply plugiator

Discuss the Creamware ASB and Klangbox hardware boxes

Moderators: valis, garyb

Post Reply
haba
Posts: 63
Joined: Thu Mar 05, 2009 2:53 pm

power supply plugiator

Post by haba » Tue Mar 27, 2018 9:08 am

hello, can somebody help me with the specs for the power suply: 9v dc, 500 mA, tip is positive or negative?
thank you!
haba

haba
Posts: 63
Joined: Thu Mar 05, 2009 2:53 pm

Re: power supply plugiator

Post by haba » Tue Mar 27, 2018 12:33 pm

center pin of plug is "+"

al_bot
Posts: 18
Joined: Sun Dec 25, 2016 2:14 pm
Location: USA

Re: power supply plugiator

Post by al_bot » Tue Mar 27, 2018 3:47 pm

Here's a picture of the US plug I had for the plugator, hope this helps...
Plugiator_Plug.jpg
Plugiator_Plug.jpg (278.39 KiB) Viewed 1047 times

haba
Posts: 63
Joined: Thu Mar 05, 2009 2:53 pm

Re: power supply plugiator

Post by haba » Tue Mar 27, 2018 4:39 pm

Thank you for answering, but the user manual says - 110/240V to 9V DC, min. 500mA, center pin of plug is „+"
https://www.manualslib.com/manual/61668 ... =49#manual
Are you shure the adapter in the picture came with the plugiator? Because its labeled 12 volt.
Haba

User avatar
RA
Posts: 350
Joined: Fri Aug 18, 2006 4:00 pm
Contact:

Re: power supply plugiator

Post by RA » Wed Mar 28, 2018 10:47 am

On these kind of adapters center pin is always plus as i have seen through the years. So just look at the specs for an appropiate adapter. I think a standard boss or chinese adapter will do. Nowadays we have a lot of adapters laying around....maybe check on your attic ;) This should be a standard part in any electronics shop. Just make sure you check the specs. Just make sure i can deliver 500mA...more is not a problem..less could be...
- We're freaks about gearz and methods -
More on dNa: http://dnamusic.nl

al_bot
Posts: 18
Joined: Sun Dec 25, 2016 2:14 pm
Location: USA

Re: power supply plugiator

Post by al_bot » Wed Mar 28, 2018 2:23 pm

Hmm. That's odd, the unit powered up. The only other plug I had close by was this one (unit did power on with this one):
Plugiator_Plug2.jpg
Plugiator_Plug2.jpg (821.59 KiB) Viewed 1001 times

haba
Posts: 63
Joined: Thu Mar 05, 2009 2:53 pm

Re: power supply plugiator

Post by haba » Sat Mar 31, 2018 1:40 am

thank you Ray and al-bot, I found an adapter and I powered it up, all seems to work normal, but at a time the unit shut itself down and restartet immediately. I measured the power...it was 7,4 volt althaugh it was declared 9 volt...I will try annother one...but I must say the crakles when I switch the instruments or the programms on the plugiator isn't nice..
Haba

Post Reply