How many plugins one can load into NOAH?
Well, you can load one instrument per slot.
But there are also some insert-slots for efx.
First this sounds not very spectacular, but the workaround is very nice and flexible.
Don't do the mistake and see Noah as an boxed Pulsar (SFP), compare it more to an NordLead (also for slots) or Chameleon (one slot).
For me, NOAH is a very flexible Synth!
Ahh, four instruments are only available on the EX version, smaller version got only two!
But there are also some insert-slots for efx.
First this sounds not very spectacular, but the workaround is very nice and flexible.
Don't do the mistake and see Noah as an boxed Pulsar (SFP), compare it more to an NordLead (also for slots) or Chameleon (one slot).
For me, NOAH is a very flexible Synth!
Ahh, four instruments are only available on the EX version, smaller version got only two!
That was exactly the information I already knew
I mean, if NOAH comes with Minimax, Vectron Player, B-2003 and Pro-One, are there still space to load, say, Prodyssey without deleting some of the existing plugs?
I know, I can use at most 4 at the time (with EX), but how many plugs the NOAH can hold in its memory for spare?
Oh, why not to think NOAH as boxed Pulsar?
I mean, if NOAH comes with Minimax, Vectron Player, B-2003 and Pro-One, are there still space to load, say, Prodyssey without deleting some of the existing plugs?
I know, I can use at most 4 at the time (with EX), but how many plugs the NOAH can hold in its memory for spare?
Oh, why not to think NOAH as boxed Pulsar?
Ahhh, now i understood.
I 'm not in front of my noah, but there are allready more devices inside the memory, like sixstring, vocoder, lightwave, in my case also the prodessey. Also all EFX are hold by the memory. And there is still enough free memory available for new devices. (sorry, have to look how much, but i remember something like 10mb or so). But in my case, i plugged allready a 256MB CF-Card into the frontslot, where i allready backuped the devices and presets. And it is no problem to load devices from this cf-card! So, what we need are more devices!
I said, don't compare Noah to SFP, because in this case SFP is more flexible. If you use Pulsar mostly for synth, then u can compare it, but in Noah u only have two inserts per slor! In SFP it could be endless. Also the routing is completly free with sfp, and sfp is also a recording station.
You can use the Audio engine of noah, but there are only two inputs.
So, that's why i said, noah is more a Synth/EFX-Box for me.
I 'm not in front of my noah, but there are allready more devices inside the memory, like sixstring, vocoder, lightwave, in my case also the prodessey. Also all EFX are hold by the memory. And there is still enough free memory available for new devices. (sorry, have to look how much, but i remember something like 10mb or so). But in my case, i plugged allready a 256MB CF-Card into the frontslot, where i allready backuped the devices and presets. And it is no problem to load devices from this cf-card! So, what we need are more devices!
I said, don't compare Noah to SFP, because in this case SFP is more flexible. If you use Pulsar mostly for synth, then u can compare it, but in Noah u only have two inserts per slor! In SFP it could be endless. Also the routing is completly free with sfp, and sfp is also a recording station.
You can use the Audio engine of noah, but there are only two inputs.
So, that's why i said, noah is more a Synth/EFX-Box for me.
Hi,
you have to use the synchronizer!
If prodessey is installed in the correct directory on your PC/Mac, it will show up inside the device-list of the synchronizer.
Then you have to mark this device for an upload (see handbook) and push synchronize...
(i think you also have to authorize the device, like in SFP). Don't forget to synchronize also the presets.
Sorry for answering not deep enough, again i am sitting in the office instead infront of my Noah
Stefan
you have to use the synchronizer!
If prodessey is installed in the correct directory on your PC/Mac, it will show up inside the device-list of the synchronizer.
Then you have to mark this device for an upload (see handbook) and push synchronize...
(i think you also have to authorize the device, like in SFP). Don't forget to synchronize also the presets.
Sorry for answering not deep enough, again i am sitting in the office instead infront of my Noah
Stefan
hello
Can i ask you another question :
I have some trouble on how to proceed to get my new multi presets in the noah memory and on the PC.
I tried to work only on the PC, creating a new preset and then synchronizing
but then on the noah side I can't see this new preset. So if you know what is the best way to do it, tell me please !
______________
And another question :
I was working last week on some demos for the cwa demos and I was using the controlfonction of the noah to control via the 4 endlessbuttons some parameters
The probleme was that after turning off the controlfonction, it seems to be impossible to come back to the defauklt values of the preset - I had to turn off the noah ?!
Can i ask you another question :
I have some trouble on how to proceed to get my new multi presets in the noah memory and on the PC.
I tried to work only on the PC, creating a new preset and then synchronizing
but then on the noah side I can't see this new preset. So if you know what is the best way to do it, tell me please !
______________
And another question :
I was working last week on some demos for the cwa demos and I was using the controlfonction of the noah to control via the 4 endlessbuttons some parameters
The probleme was that after turning off the controlfonction, it seems to be impossible to come back to the defauklt values of the preset - I had to turn off the noah ?!
_______________________________________
our music at http://algufr.bandcamp.com
and at http://alg95.bandcamp.com
more music at http://hurpasard.free.fr/index_en.html
our music at http://algufr.bandcamp.com
and at http://alg95.bandcamp.com
more music at http://hurpasard.free.fr/index_en.html