New Sound Designer Tool : Harm Gen Synth (non-Scope)

Please remember the terms of your membership agreement.

Moderators: valis, garyb

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

New Sound Designer Tool : Harm Gen Synth (non-Scope)

Post by DragonSF » Sat Sep 01, 2018 4:03 am

I created 'The ultimate sound design toolkit". Start from scratch or use and existing instruments profile - either as raw data, re-synthesis output or math. formula. Edit it by merging with one or or more instruments, chnage the amplitudes, stretch times, copy and paste or move or delete segments. Sound tool is connected to a DSP via MIDI, where the sound can be heard in realtime. Even more: you can reverse selected segments , one complete partial or all with one click.
Also chaning the phase of one partial of add some frequency offset is possible. Only limits are your imagination.
Included are also a dynamic filter, a Delay function (4-Tap) with FB and FM.
Also keyboard velocity and modulation amount is honoured.
hpImage3.jpg
hpImage3.jpg (49.57 KiB) Viewed 1220 times
hpImage2.jpg
hpImage2.jpg (144.37 KiB) Viewed 1220 times
Attachments
hpImage4.jpg
hpImage4.jpg (181.85 KiB) Viewed 1220 times

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Sat Sep 01, 2018 4:10 am

hpImage5.jpg
hpImage5.jpg (183.53 KiB) Viewed 1218 times
Here is the screenshot of the main Editor
A Tutorial will follow.

User avatar
t_tangent
Posts: 652
Joined: Sun Dec 28, 2003 4:00 pm
Location: UK

Re: New Sound Designer Tool : Harm Gen Synth

Post by t_tangent » Sat Sep 01, 2018 2:25 pm

Looks very interesting, and look forward to learning more. Great stuff :)

Music Manic
Posts: 1630
Joined: Wed May 15, 2002 4:00 pm
Contact:

Re: New Sound Designer Tool : Harm Gen Synth

Post by Music Manic » Sun Sep 02, 2018 5:39 am

Is this designed for standard waveforms or will it work with complex waveforms too?

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Sun Sep 02, 2018 3:40 pm

It works on all kind of waveforms, as long , as they long as they are periodic (i.e. a FFT is meaningful).

User avatar
JoPo
Posts: 2144
Joined: Wed Jun 05, 2002 4:00 pm
Location: VRRAAaaooOôOooommmh
Contact:

Re: New Sound Designer Tool : Harm Gen Synth

Post by JoPo » Mon Sep 03, 2018 4:27 am

Hi, DragonSF !

But where, on which platform, how, when ?
> > > > > > > > > > > > --- Musica --> here ! ---< < < < < < < < < < < <

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Mon Sep 03, 2018 2:34 pm

The GUI: at the moment Win 10. It's written within Qt, so it is portable. An earlier Version worked on Mac OS and iPad.
The DSP part is Teensy 3.6 at the Moment. I might be able to port it to Scope.
There is no official release schedule, but the principla programming is finished. Now it's all about testing.

jksuperstar
Posts: 1547
Joined: Mon Nov 15, 2010 12:57 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by jksuperstar » Mon Sep 03, 2018 8:13 pm

Cool, I've got 2 Teensy 3.6 boards + Audio shields for them.

Did you extend the audio library in 1.42, or do something completely different?

I can beta test if you'd like. This seems like a good base for a eurorack oscillator ;)

User avatar
valis
Posts: 4683
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: New Sound Designer Tool : Harm Gen Synth

Post by valis » Mon Sep 03, 2018 11:28 pm

Stay with Teensy! Or any other similar board, I love playing with these small things in my workspace. I have 2 NextThing TheChip's left in service here, 4 raspberry pi's from the first model up to a 3, and a box full of arduinos that have served as LED strip controllers and many other things. I would love a reason to add a Teensy to the arsenal, and for music no less =]

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Tue Sep 04, 2018 3:34 pm

jksuperstar wrote:
Mon Sep 03, 2018 8:13 pm
Cool, I've got 2 Teensy 3.6 boards + Audio shields for them.

Did you extend the audio library in 1.42, or do something completely different?

I can beta test if you'd like. This seems like a good base for a eurorack oscillator ;)
Yes, I extended some classes slightly, but then remaining libraries have been untouched. I'm using both the official Audio Shield and for convinience the BGA, which gives better noise output, separate MIDI and 6.35mm jacks.
Yes, an Eurorack comes directly to mind.
And thanks for the beta testing offer, I think, I'll can provide you with a beta version end of the week.
And @valis: I think, I got this Arduino stuff: Megas, Unos, Maples,Teensies, Wrroom etc.

User avatar
valis
Posts: 4683
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: New Sound Designer Tool : Harm Gen Synth

Post by valis » Tue Sep 04, 2018 11:05 pm

More than me then, but it’s not a primary focus here. I’ll grab a teensy if you want to throw a beta my way too...

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Wed Sep 05, 2018 4:37 am

Yes, I'll send my GUI and Teensy DSP code (must be 3.6) to anyone, who's interested.
One set back with the original Audio-board: You can do MIDI only over USB and loose the Ability, to monitor.

Ripper
Posts: 205
Joined: Tue Jan 08, 2013 5:33 am

Re: New Sound Designer Tool : Harm Gen Synth

Post by Ripper » Wed Sep 05, 2018 5:14 am

I also have a Teensy 3.6 (and a 2++): What would be the best alternative to the official audio shield for Teensy 3.6?

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Wed Sep 05, 2018 2:34 pm

I'm using the Blackaddr Guitar Adapter. Better sound, better flexibility and external MIDI. Availibilty is not the best though.
3.2 is nice for small programs, but not very powerful in this case. My programs use 16 sine osc and 16 envelopes and 16 multipliers internally.

Ripper
Posts: 205
Joined: Tue Jan 08, 2013 5:33 am

Re: New Sound Designer Tool : Harm Gen Synth

Post by Ripper » Wed Sep 05, 2018 10:20 pm

Thanks DragonSF.
I will check that.

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Mon Sep 10, 2018 3:42 am

The HarmGen is ready for beta testing. Anyone, who is interested, please send me a message and I'll provide the necessary exes and Arduino sources.

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth

Post by DragonSF » Mon Sep 10, 2018 3:14 pm

Just to make it clear: this project is (at the moment) not running on Scope or Scope HW.

User avatar
valis
Posts: 4683
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: New Sound Designer Tool : Harm Gen Synth (non-Scope)

Post by valis » Mon Sep 10, 2018 3:20 pm

Edited your title for you. Next client billing I'll grab a teensy and participate...

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth (non-Scope)

Post by DragonSF » Tue Sep 11, 2018 9:20 pm

valis wrote:
Mon Sep 10, 2018 3:20 pm
Edited your title for you. Next client billing I'll grab a teensy and participate...
Thanks.

DragonSF
Posts: 384
Joined: Sun Nov 08, 2015 4:28 pm

Re: New Sound Designer Tool : Harm Gen Synth (non-Scope)

Post by DragonSF » Tue Sep 18, 2018 4:28 am

Here are the zips.
Harmgen.zip contains the Arduino sources, Audio.zip my change sine Generator files and Hydra-pro the GUI.
Audio.zip
(5.59 KiB) Downloaded 4 times
HarmGen.zip
(12.23 KiB) Downloaded 5 times
As the GUI files are too large, send me a message witrh your email and I'll send yopu the zip via wetransfer.

Please check the Arduino files: I'm using BA Audio card. Please replace
BAAudioEffectDelayExternal BA_delayExt1;

BAAudioControlWM8731 codec;
with your Audio Card delays and codecs.

Post Reply