Xite-1 communication error/ hardware caonnot be setup properly
Xite-1 communication error/ hardware caonnot be setup properly
Hello, on weekend I got an xite-I witch I bought from ebay...after instalation it worked fine for a couple of hours with no problems (didnt spend to much time with it). Today I tried to start up the system....wit the fowwowing message
Acommunicationerror withScopeXite(brd0) has occured. This problem can normaly becorrected by reloading the DSPs. Do you want to try that?
after choosing yes..I get:
Hardware cannot be setup properly
could not gain acces to scope hardware
after that
Hardwre version 30 dedectet. This hardware requires a software update please consult the notation guide.
Anybody has an Idea what to do? Did I bought a broken Xite-1???
Thank you for any help or suggestion.
Haba
Acommunicationerror withScopeXite(brd0) has occured. This problem can normaly becorrected by reloading the DSPs. Do you want to try that?
after choosing yes..I get:
Hardware cannot be setup properly
could not gain acces to scope hardware
after that
Hardwre version 30 dedectet. This hardware requires a software update please consult the notation guide.
Anybody has an Idea what to do? Did I bought a broken Xite-1???
Thank you for any help or suggestion.
Haba
Re: Xite-1 communication error/ hardware caonnot be setup properly
those messages indicate that the Scope software is not communicating with the hardware.
this could be because:
1. the XITE was not powered and connected before booting the computer. the XITE is not hot swappable.
2. the HDMI cable is not seated correctly or is bad.
3. the PCIe card or Expresscard is not seated correctly or is bad.
4. the XITE is broken.
5. the computer's slot is bad...
this could be because:
1. the XITE was not powered and connected before booting the computer. the XITE is not hot swappable.
2. the HDMI cable is not seated correctly or is bad.
3. the PCIe card or Expresscard is not seated correctly or is bad.
4. the XITE is broken.
5. the computer's slot is bad...
Re: Xite-1 communication error/ hardware caonnot be setup properly
thank you verry much Garry...I guess we have to wair with the plugin transfers....
1. the xite was powerd on befor PC
2. I tryd 2 cables
....why had it functioned for 3-4 days?
i try to reseat the pcie card...
1. the xite was powerd on befor PC
2. I tryd 2 cables
....why had it functioned for 3-4 days?
i try to reseat the pcie card...
Re: Xite-1 communication error/ hardware caonnot be setup properly
I get this periodically too. Generally a series of unplugging everything and plugging it back in, plus some reboots seems to do the job eventually. When it doesn't, I've had to reseat the pci-e card.
It's a little bit worrying when it happens though and seems to be when I come back after not having used for a number of days and especially if it's been cold. Mysterious
It's a little bit worrying when it happens though and seems to be when I come back after not having used for a number of days and especially if it's been cold. Mysterious
Re: Xite-1 communication error/ hardware caonnot be setup properly
it was the card...I reseatet the card...seams ok now. thank you...in that case eventually I by an new card later...
thanks for the checklist, Gary
thanks for the checklist, Gary
Re: Xite-1 communication error/ hardware caonnot be setup properly
i'm very glad that it's working!
Re: Xite-1 communication error/ hardware caonnot be setup properly
Always good to have spare PCI-e connector cards.
I’ve never needed one but put a new one in after 8 years and now the original is spare.
I’ve never needed one but put a new one in after 8 years and now the original is spare.
Re: Xite-1 communication error/ hardware caonnot be setup properly
Yes, this would be my next purchase...but...I see conflicts with IRQ sharing...might this cause the problem? It ocurs randomly...the rate to get it started is appromaximately 25 %. Running xp sp3 on hp xw4600
Re: Xite-1 communication error/ hardware caonnot be setup properly
probably not what made the problem, but you might tray a different slot anyway. the PCIe root port controllers don't matter, but it's probably better if the video card doesn't share an irq with the XITE.
Re: Xite-1 communication error/ hardware caonnot be setup properly
I'll try this tomorow. Was a little bit strange...I deactivated the xite in system manager... and than reactivatet and restartet...and voila...but, as I said it occurs randomly... over the weekend I'll give it a try to tighten the hdmi ports ...they are loose too..
Thanke you Gary for your help
Thanke you Gary for your help
Re: Xite-1 communication error/ hardware caonnot be setup properly
sure.
the other slots will probably share with usb controllers, but it's not too hard to turn off the offending usb controllers in the device manager. sharing isn't a problem unless it's usb, firewire or lan, and mainly usb.
yes, the hdmi ports being loose will do this, but be very careful. they're easy to break.
the other slots will probably share with usb controllers, but it's not too hard to turn off the offending usb controllers in the device manager. sharing isn't a problem unless it's usb, firewire or lan, and mainly usb.
yes, the hdmi ports being loose will do this, but be very careful. they're easy to break.
Re: Xite-1 communication error/ hardware caonnot be setup properly
I have tried the card in every pcie port...all of them are at irq 16, sharing the grafic card. I had bluescreens. Now its set in the short pcie and it seams to function.
- Attachments
-
- bluescreen.jpg (1.44 MiB) Viewed 9213 times
Re: Xite-1 communication error/ hardware caonnot be setup properly
Hi...in my case I have run into this as well. It is very frustrating that the ScanSnap software loses communication with the device. I have had a little success with getting it to communicate by pressing the scan button on the device, but like you mentioned reboot always works.
seo consultant
seo consultant