Scope 7
Re: Scope 7
Download software from here:
http://scope.zone/index.php?id=1978&lg=en
Once Gary are done sleeping, he will look into generating your codes.
During installation you will be given an authorization string at some point. This is where you paste in the code Gary will mail you.
http://scope.zone/index.php?id=1978&lg=en
Once Gary are done sleeping, he will look into generating your codes.
During installation you will be given an authorization string at some point. This is where you paste in the code Gary will mail you.
Re: Scope 7
Download is here :
http://scope.zone/index.php?id=1978&lg= ... scope_v7.0
And yes : you have to wait for the keys.
http://scope.zone/index.php?id=1978&lg= ... scope_v7.0
And yes : you have to wait for the keys.
Re: Scope 7
OK yes but is Scope 7 different to 5.1 for authorizationpetal wrote:Download software from here:
http://scope.zone/index.php?id=1978&lg=en
Once Gary are done sleeping, he will look into generating your codes.
During installation you will be given an authorization string at some point. This is where you paste in the code Gary will mail you.
on 5.1 install > get string > send string to S|C > receive back key file
on Scope 7 > install with codes sent on email > no need to send string request to S|C ????? - this is the query
I ask this because there are 4 devices I'll install Scope 7 on over time
3 x pci cards (all different)
1 x xite-1
Re: Scope 7
No sending back and forth to SC needed.
Scope v7 works with the keys mailed to you + your old keys for authorization of all other plugins, as I understand it.
Just keep your old (newest) keys handy, if you are doing a new install on a virgin windows installation.
I didn't need them, since I just uninstalled Scope 5.1 and installed v7 in the old but now almost empty directory, where all the old keys are still stored
Scope v7 works with the keys mailed to you + your old keys for authorization of all other plugins, as I understand it.
Just keep your old (newest) keys handy, if you are doing a new install on a virgin windows installation.
I didn't need them, since I just uninstalled Scope 5.1 and installed v7 in the old but now almost empty directory, where all the old keys are still stored
Re: Scope 7
OK Petal I hear you - this is good to read - I've got the old keys - all backed up - it simplifies admin. at the other end as well -
off topic question - was sdk 5.1 "free" to 5.1 owners? (one of the scope 7's will have sdk)
off topic question - was sdk 5.1 "free" to 5.1 owners? (one of the scope 7's will have sdk)
Re: Scope 7
Yesterday I used ReLoad with RePack to extract all from Best Services Peter Siedlaczek Advanced Orchestra. This took 6 minutes to create a Reason NN-XT ready to use refill. Then I did the extraction for Scope detailed here http://www.hitfoundry.com/issue_09/sts_mast.htm under converting AKAI samplers and loaded STR SORDINO into both an STS5000 and an NN-XT which are both playable from a Reason project using the External MIDI Instrument in Reason to trigger the STS5000 running in Scope.Bud Weiser wrote: Phead NNXT might be a different story.
I didn´t invest the time converting for Phead too since CD-Xtract didn´t offer that format in the past and I had no intention buying more sample conversion apps,- but I loaded some AKAI floppy disks into Reason 4 /NNXT when the old "reload" utility was released ... https://www.propellerheads.se/press/15- ... ad-utility ...
And Reload did it indeed pretty good because it was specialized for AKAI format into Reason samplers.
I believe it´s abandoned since some time but I guess Phead uses these (and probably upgraded) routines still in Reason.
Cant hear any difference whatsoever so far. So - the filters you're referring to in STS - are they the ones in Keygroup=>Options=>Filter ?
Once I work that out, I can do a comparion on the STS filter vs NN-XT filter. The NN-XT filters both at the program level and the sample level. Then I can conduct tests across a wider range of samples.
- sunmachine
- Posts: 477
- Joined: Mon Mar 01, 2010 12:37 am
Re: Scope 7
No, it wasn't.fraz wrote: off topic question - was sdk 5.1 "free" to 5.1 owners? (one of the scope 7's will have sdk)
Re: Scope 7
Right OK, I probably don't have sdk 5 then - Unless it was in the NSA sale.sunmachine wrote:No, it wasn't.fraz wrote: off topic question - was sdk 5.1 "free" to 5.1 owners? (one of the scope 7's will have sdk)
If it wasn't included in the 5.1 release I won't have sdk 5.1 then - But I will have sdk v7
-
- Posts: 1739
- Joined: Wed May 15, 2002 4:00 pm
- Contact:
Re: Scope 7
Installation Error.
Cannot start because board(s) or driver not properly installed. Please check installation.
I renamed 5.1 folder and installed 7. Did I do something wrong?
Cannot start because board(s) or driver not properly installed. Please check installation.
I renamed 5.1 folder and installed 7. Did I do something wrong?
Re: Scope 7
You need to uninstall 5.1 before installing 7.
In your case now - I'd unistall both and then reinstall 7.
In your case now - I'd unistall both and then reinstall 7.
- sunmachine
- Posts: 477
- Joined: Mon Mar 01, 2010 12:37 am
Re: Scope 7
I didn't uninstall 5.1.petal wrote:You need to uninstall 5.1 before installing 7.
In your case now - I'd unistall both and then reinstall 7.
I just renamed the 5.1 folder and installed 7 into a new folder.
Seems to work fine so far.
Re: Scope 7
For me, i just renamed 5.1 dirs just to be sure (.bak)
and installed Scope 7. No problem here.
But...i am probably the only one still on XP (pci cards) haha...only for sdk 4
I just switch the drivers, disable and re-enable cards by script (so no restart required) and run the other software versions.
Lines for my script are: (just a simple .bat file)
devcon disable *VEN_14B5
devcon enable *VEN_14B5
couldnt get the devcon to exchange the drivers though
But in the near future i will go on to win7 probably, if it was only to use the remaining 8gb of ram
and installed Scope 7. No problem here.
But...i am probably the only one still on XP (pci cards) haha...only for sdk 4
I just switch the drivers, disable and re-enable cards by script (so no restart required) and run the other software versions.
Lines for my script are: (just a simple .bat file)
devcon disable *VEN_14B5
devcon enable *VEN_14B5
couldnt get the devcon to exchange the drivers though
But in the near future i will go on to win7 probably, if it was only to use the remaining 8gb of ram
- We're freaks about gearz and methods -
More on dNa: http://dnamusic.nl
More on dNa: http://dnamusic.nl
Re: Scope 7
OK - It didn't work right for me, but oksunmachine wrote:I didn't uninstall 5.1.petal wrote:You need to uninstall 5.1 before installing 7.
In your case now - I'd unistall both and then reinstall 7.
I just renamed the 5.1 folder and installed 7 into a new folder.
Seems to work fine so far.
Re: Scope 7
@Music Manic
btw, did you try and manually point your device manager to the driver folder from the v7 folder. (because of the "driver not properly installed" message)
i get this when i try starting v51 or 7 when i still have the v4 driver installed or vice versa
As it says, driver not installed...reinstall driver from the version you want to run. (excuse me if you already tried this)
btw, did you try and manually point your device manager to the driver folder from the v7 folder. (because of the "driver not properly installed" message)
i get this when i try starting v51 or 7 when i still have the v4 driver installed or vice versa
As it says, driver not installed...reinstall driver from the version you want to run. (excuse me if you already tried this)
- We're freaks about gearz and methods -
More on dNa: http://dnamusic.nl
More on dNa: http://dnamusic.nl
-
- Posts: 1739
- Joined: Wed May 15, 2002 4:00 pm
- Contact:
Re: Scope 7
Didn't work but thanks.petal wrote:You need to uninstall 5.1 before installing 7.
In your case now - I'd unistall both and then reinstall 7.
-
- Posts: 1739
- Joined: Wed May 15, 2002 4:00 pm
- Contact:
Re: Scope 7
Yes did that first. I'm also PCI on XP.RA wrote:@Music Manic
btw, did you try and manually point your device manager to the driver folder from the v7 folder. (because of the "driver not properly installed" message)
i get this when i try starting v51 or 7 when i still have the v4 driver installed or vice versa
As it says, driver not installed...reinstall driver from the version you want to run. (excuse me if you already tried this)
I just uninstalled the cards and rebooted. The restart loaded v5 drivers then I went to SCOPE PCI/DRIVERS/ and ran the v7.exe to update the drivers to version 7 nad it now asks me to trust Sonic Core (which it didn't before). Rebooted and still same error.
After I installed SDK too and it tells me Windows cannot verify drivers Code 52. Does it have anything to with C++ install?
Thanks for help btw.
Re: Scope 7
If i point the device manager manually to the driver (because i dont have an exe for the driver....just inf) there is no trust etc issue here.
Sp3 is needed
And if you use the script you don;t need to restart xp...but you need to make sure the pointers are right (VEN_14B5)
Sp3 is needed
And if you use the script you don;t need to restart xp...but you need to make sure the pointers are right (VEN_14B5)
- We're freaks about gearz and methods -
More on dNa: http://dnamusic.nl
More on dNa: http://dnamusic.nl
-
- Posts: 1739
- Joined: Wed May 15, 2002 4:00 pm
- Contact:
Re: Scope 7
Ah I'm still on Service Pack 1. Is that it? I get drivers in ok but when I reboot device manager General tab says:RA wrote:If i point the device manager manually to the driver (because i dont have an exe for the driver....just inf) there is no trust etc issue here.
Sp3 is needed
And if you use the script you don;t need to restart xp...but you need to make sure the pointers are right (VEN_14B5)
Windows cannot verify digital signature for the drivers...................Code 52
Re: Scope 7
yeah you really need sp3 ;-p
- We're freaks about gearz and methods -
More on dNa: http://dnamusic.nl
More on dNa: http://dnamusic.nl
-
- Posts: 1739
- Joined: Wed May 15, 2002 4:00 pm
- Contact:
Re: Scope 7
I do Apologise. I'm on Windows 7 SP 1RA wrote:yeah you really need sp3 ;-p
This makes it worse.
My old PC is XP
P.S. Everytime I uninstall it reverts to 5.1 drivers even though I've deleted them. How is it remaking them? (Edit-I think It's directed to the old v5 directory)