Can I add a IO plate on a Sonic rocket booster

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Post Reply
User avatar
Marco
Posts: 1260
Joined: Thu Oct 10, 2013 4:27 pm
Location: Ödenwald

Can I add a IO plate on a Sonic rocket booster

Post by Marco »

Can I add a IO plate on a Sonic rocket booster card to add more physical IO? If I have a spare part from an other card?
:wink: out and about for music production. Are you still configguring your Studio :lol: music first!
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Can I add a IO plate on a Sonic rocket booster

Post by garyb »

yes. it will work 99% of the time. since the cards were made at different times, there may be some (ever so slightly)different parts used. a few i/o plates don't work with a few cards, but i've never seen that myself.
User avatar
Marco
Posts: 1260
Joined: Thu Oct 10, 2013 4:27 pm
Location: Ödenwald

Re: Can I add a IO plate on a Sonic rocket booster

Post by Marco »

That's good news!
:wink: out and about for music production. Are you still configguring your Studio :lol: music first!
User avatar
MrV
Posts: 233
Joined: Tue May 20, 2003 4:00 pm
Location: Melbourne , Australia
Contact:

Re: Can I add a IO plate on a Sonic rocket booster

Post by MrV »

I've done it , works fine :)
fraz
Posts: 1009
Joined: Fri Jun 03, 2005 4:00 pm
Location: Springfield !

Re: Can I add a IO plate on a Sonic rocket booster

Post by fraz »

Marco wrote:Can I add a IO plate on a Sonic rocket booster card to add more physical IO? If I have a spare part from an other card?
Is this referring to the ADAT expansion I/O plate usually used with Power Sampler / Scope Home 3 DSP PCI card?

On this plate is also 1 x Z-link connector for use with Luna II boxes !
User avatar
MrV
Posts: 233
Joined: Tue May 20, 2003 4:00 pm
Location: Melbourne , Australia
Contact:

Re: Can I add a IO plate on a Sonic rocket booster

Post by MrV »

No , not the Luna expansion plate ,, an actual daughter board with back plate , in my case it's from a dead Scope Pro
card , but the daughter board still works ok .

Michael
Post Reply