SB 404
Re: SB 404
so to clarify on sb404 - the bug is on the gate sequencer, the note sequencer or the control sequencer or on all of them?
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
-
- Posts: 1638
- Joined: Mon Nov 15, 2010 12:57 pm
Re: SB 404
My experience is all of them. Press play,and nothing happens. Although, if the note seq didn't work but either of the others did...it might've gone unnoticed. It first doesn't show any pattern loaded when changing presets.
-
- Posts: 1168
- Joined: Sun Apr 04, 2004 4:00 pm
- Location: Brighton England
- Contact:
Re: SB 404
Will give a clear response tomorrow when at the studio. From what I remember it's applying of all these things not happening until samplerate changing. Pressing the keys plays the sequence fine.
Re: SB 404
I tried it again and SB 404 works fine on XITE-1 even when chaning patterns. I don't know, how to make a new pattern, so please someone tell me how to. Otherwise I'd say SB404 is working (on any DSP), but 808 and 909 don't (only one or two of the the drum oscs are triggered).
Re: SB 404
well, it is well documented by now that it does not work. don't know what you did that it worked for you, maybe your xite placed it on dsp2 and thus it worked
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: SB 404
Nope, I can assign it to any DSP and it still works. Though only MIDI notes > 48 work (which of course doesn't make sense for a bass).faxinadu wrote:well, it is well documented by now that it does not work. don't know what you did that it worked for you, maybe your xite placed it on dsp2 and thus it worked
I found the editor: when I set the keysplit to a lower note, I can also play bass notes.
Last edited by DragonSF on Fri Dec 16, 2016 1:48 am, edited 4 times in total.
Re: SB 404
you must have a magic xite it is a known issue
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: SB 404
Magic anyway (it doesn't work with A16 but with A8200). Which notes are you trying to play?faxinadu wrote:you must have a magic xite it is a known issue
Re: SB 404
i don't have an xite as you know, but it is by now well documented that all sequencer based modules do not perform correctly on xite. this includes sb404 and modular sequencer mdoules as well as our own ocean swift sequencer based devices like gateway and ocean storm (since been fixed on storm).
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: SB 404
Here the only sequencer, which properly works is the SB 404. All others (as said before) can only output 1 or two signals. As the SB 404 needs only one output (guessing here), it you be fine.
-
- Posts: 1168
- Joined: Sun Apr 04, 2004 4:00 pm
- Location: Brighton England
- Contact:
Re: SB 404
I'll post a video tonight (hopefully) to clearly show the issue. The notes bellow 48 are for changing the pattern banks when step sequencer is active.
Re: SB 404
we actually fixed it, but then a new issue arrises where you can not open more than one sb404 in a project (should not be happening, its monophonic and the seq modules are not dsp expensive, so it is somehow creating a new issue)... so... the fix is not a much more than first-aid at this point and it can not be released as a fix.
Scope, Android, Web, PC Plugins and Sounds:
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
http://www.oceanswift.net
Music
https://faxinadu.bandcamp.com/
Re: SB 404
I see. So when the split is on, any note below should switch the pattern(which doesn't happen) and above start the sequencer. So here, the pattern switch doesn't work (no MIDI signal below split-point is registered).Liquid EDGE wrote:I'll post a video tonight (hopefully) to clearly show the issue. The notes bellow 48 are for changing the pattern banks when step sequencer is active.
-
- Posts: 1168
- Joined: Sun Apr 04, 2004 4:00 pm
- Location: Brighton England
- Contact:
Re: SB 404
exactly. and the same when you try to edit the steps in the step sequencer. nothing actually changes (audibly) until you follow it with the sample rate switching!DragonSF wrote:I see. So when the split is on, any note below should switch the pattern(which doesn't happen) and above start the sequencer. So here, the pattern switch doesn't work (no MIDI signal below split-point is registered).Liquid EDGE wrote:I'll post a video tonight (hopefully) to clearly show the issue. The notes bellow 48 are for changing the pattern banks when step sequencer is active.
Assigning to dsp2 gets that stuff to behave. but then as soon as you add/turn on fx filters etc on the sb404 dsp2 can not cope and just errors.
maybe the pitch changes work on the fly. i cant remember. but im going to have a quick look tonight. (phew, i dont need to do the video )
-
- Posts: 1168
- Joined: Sun Apr 04, 2004 4:00 pm
- Location: Brighton England
- Contact:
Re: SB 404
Still, id be more than happy with 1 perfectly working sb404 in a project!!!faxinadu wrote:we actually fixed it, but then a new issue arrises where you can not open more than one sb404 in a project (should not be happening, its monophonic and the seq modules are not dsp expensive, so it is somehow creating a new issue)... so... the fix is not a much more than first-aid at this point and it can not be released as a fix.
-
- Posts: 1168
- Joined: Sun Apr 04, 2004 4:00 pm
- Location: Brighton England
- Contact:
Re: SB 404
Also, wonder if the fix/first-aid can be applied to Solaris??!! As 1 fully working Solaris (yes I know Solaris only works with low poly on Xite, but still) would be great! (Not wanting to push it)Liquid EDGE wrote:Still, id be more than happy with 1 perfectly working sb404 in a project!!!faxinadu wrote:we actually fixed it, but then a new issue arrises where you can not open more than one sb404 in a project (should not be happening, its monophonic and the seq modules are not dsp expensive, so it is somehow creating a new issue)... so... the fix is not a much more than first-aid at this point and it can not be released as a fix.
For me this is all very exciting and a break through!!!!
- FernandoHood
- Posts: 142
- Joined: Fri May 20, 2016 6:31 am
- Location: 127.0.0.0
Re: SB 404
i made more than 50 custom presets, something i took weeks to do, got all the sweet spots and sounds i wanted to get from it,
none of them load now, wasted too many hours with this synth with zero results. Sometimes not even the factory presets load....
I love SC synths but i Dont understand why this is so praised, for me it just seems broken
none of them load now, wasted too many hours with this synth with zero results. Sometimes not even the factory presets load....
I love SC synths but i Dont understand why this is so praised, for me it just seems broken
Ocean Swift Synthesis - Scope 3rd Party Plugins
http://www.oceanswift.net
FernandoHood
http://www.fernandohood.com
Atom Sessions - Music
https://atomsessions.bandcamp.com/
http://www.oceanswift.net
FernandoHood
http://www.fernandohood.com
Atom Sessions - Music
https://atomsessions.bandcamp.com/
- the_mind_as_music
- Posts: 74
- Joined: Sun Apr 09, 2017 1:21 am
Re: SB 404
Hi there everyone,
I recently re-installed my Scope software and was going through my plug-ins and coincidently saw this thread and thought I'd fire the SB 404 up.
I am using Studio One ver.3 as my DAW and everything was fine until I tried to sync to midi clock. It sync'ed ok, except it was going at 3600bpm! (in a 120 bpm song).
I thought I would try and install Reaper to see what happened and it worked brilliantly.
I've tried a few google searches but I can't solve the issue. I wondered if anyone has the same problem (with Studio One ver. 3) or even an answer maybe.
Thanks in advance,
Robert
I recently re-installed my Scope software and was going through my plug-ins and coincidently saw this thread and thought I'd fire the SB 404 up.
I am using Studio One ver.3 as my DAW and everything was fine until I tried to sync to midi clock. It sync'ed ok, except it was going at 3600bpm! (in a 120 bpm song).
I thought I would try and install Reaper to see what happened and it worked brilliantly.
I've tried a few google searches but I can't solve the issue. I wondered if anyone has the same problem (with Studio One ver. 3) or even an answer maybe.
Thanks in advance,
Robert
check out my Sonic-Core Modular / eurorack emulations and other stuff here;
https://www.youtube.com/channel/UCauLvP ... kC_k6M_Fhg …?
https://www.instagram.com/the.mind.as.music/
twitter - https://twitter.com/mind_as_music
https://www.youtube.com/channel/UCauLvP ... kC_k6M_Fhg …?
https://www.instagram.com/the.mind.as.music/
twitter - https://twitter.com/mind_as_music
- the_mind_as_music
- Posts: 74
- Joined: Sun Apr 09, 2017 1:21 am
Re: SB 404
Just a quick message;
I gave it another go and realised you have to tick the midi timecode box.
Apologies for not trying that earlier!
I gave it another go and realised you have to tick the midi timecode box.
Apologies for not trying that earlier!
check out my Sonic-Core Modular / eurorack emulations and other stuff here;
https://www.youtube.com/channel/UCauLvP ... kC_k6M_Fhg …?
https://www.instagram.com/the.mind.as.music/
twitter - https://twitter.com/mind_as_music
https://www.youtube.com/channel/UCauLvP ... kC_k6M_Fhg …?
https://www.instagram.com/the.mind.as.music/
twitter - https://twitter.com/mind_as_music