yes i like that in bc modular were you can create circuits and set to 1 dsp and then save that circuit as a mdl
and then reuse it in other projects
the clam modules are great for this
Presets
Re: Presets
yes, it usually can bejhulk wrote:if a module is protected as you have the sdk can it be switched so that it can be set
- Roland Kuit
- Posts: 670
- Joined: Fri Dec 28, 2012 1:42 pm
- Location: NL/SWE
- Contact:
Re: Presets
I've rebuild the path. And it works again. The preset-thing, LFO settings and other ones.
The old patch, I used to experiment with and it became a new thing I'm very happy with.
Thanks all.
But it makes me wonder if S|C can build out the copy/paste option for modules.
Just for faster patching. Speeding up the work flow tremendously.
The old patch, I used to experiment with and it became a new thing I'm very happy with.
Thanks all.
But it makes me wonder if S|C can build out the copy/paste option for modules.
Just for faster patching. Speeding up the work flow tremendously.
Avant-electronic composer | synthesis research | lecturer
http://www.rolandkuit.com/
http://www.rolandkuit.com/
-
- Posts: 1638
- Joined: Mon Nov 15, 2010 12:57 pm
Re: Presets
Yep, copy paste on a large scale, with routing across those modules...or you can use a CLM from the BCModular collection. The shell doesn't take much DSP resources.
Re: Presets
yes if you use certain circuits in many project the clm mdl is great for that
- Roland Kuit
- Posts: 670
- Joined: Fri Dec 28, 2012 1:42 pm
- Location: NL/SWE
- Contact:
Re: Presets
Good news, thanks!
Avant-electronic composer | synthesis research | lecturer
http://www.rolandkuit.com/
http://www.rolandkuit.com/