Boot up

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Post Reply
AndyP13
Posts: 27
Joined: Sat Dec 01, 2007 2:16 am

Boot up

Post by AndyP13 »

Firstly a big thank you to the people who helped me out after I installed the V7 upgrade - The issue was resolved by upgrading to Windows 10.

After I boot my computer and start the Scope software I get the following (not all the time)
Scope.PNG
Scope.PNG (9.77 KiB) Viewed 1391 times
User avatar
astroman
Posts: 8406
Joined: Fri Feb 08, 2002 4:00 pm
Location: Germany

Re: Boot up

Post by astroman »

if it's not a random error (some condition triggered the wrong number), this usually pops up with certain 'long delay dsp modules' (residing in the dsp folder), obviously related with specific hardware releases.
I've had it with both 6 and 15 DSP cards and some reverbs (iirc) and could never make a clue out of it.
(the plugins were 'compatible' and others with a similiar setup had no problems running them)
You may check for reverb/delay effects in your startup project - if there are none it's probably an erroneous message.
(I guess it locks you in a loop and you have to restart Scope )

cheers, Tom
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Boot up

Post by garyb »

does it start after hitting "yes"?

if so, it's the startup project. it's not a big deal, if it starts.
Post Reply