Thoughts on a PCI chassis

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Posts: 633
Joined: Sun Aug 17, 2003 4:00 pm
Location: Slovenia

Re: Thoughts on a PCI chassis

Post by fidox » Sat May 20, 2017 8:16 am

I have this motherboard, it has 3 pci slots, but, 3rd pci slot is usable if you want to use cpu's onboard graphic, or graphic card which is slim enough or has cooler on other side of card :)
Graphic card is simple , asus r5 230 1gb silent and slim.
But i recommend using pci-e card than onboard graphic, cause i had some timing issues (cubase sequencer) with onboard graphic.
Motherboard supports both cpu's Skylake (which i have i7 6700) or Kaby lake (with latest bios installed).

Masterverbs test - loading = 12 (after 13 pci limit)

User avatar
Posts: 1034
Joined: Thu Oct 10, 2013 4:27 pm
Location: Germany

Re: Thoughts on a PCI chassis

Post by Marco » Sat May 20, 2017 11:56 am

I use external synths to relieve the pc. This is a very old idea from the time when Atari was the most modern computer system, this was your Way to make your day with a computer system in your studio, and today, there is it still a good way. Because with the scope you have all unlimited possibilities to integrate. It is not said that there is an obligation to use only a computer system to make music. With scope you can use and integrate everything ever aviable in Studio.
Scope 7 user since 2017 and Scope user since 1998. :o

Post Reply