Can I add a IO plate on a Sonic rocket booster

A place to talk about whatever Scope music/gear related stuff you want.
Post Reply
User avatar
Marco
Posts: 904
Joined: Thu Oct 10, 2013 4:27 pm
Location: Germany

Can I add a IO plate on a Sonic rocket booster

Post by Marco » Sat Apr 15, 2017 3:46 am

Can I add a IO plate on a Sonic rocket booster card to add more physical IO? If I have a spare part from an other card?
Scope 7 user since 2017 and Scope user since 1998. :o

User avatar
garyb
Posts: 21192
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Can I add a IO plate on a Sonic rocket booster

Post by garyb » Sat Apr 15, 2017 9:19 am

yes. it will work 99% of the time. since the cards were made at different times, there may be some (ever so slightly)different parts used. a few i/o plates don't work with a few cards, but i've never seen that myself.

User avatar
Marco
Posts: 904
Joined: Thu Oct 10, 2013 4:27 pm
Location: Germany

Re: Can I add a IO plate on a Sonic rocket booster

Post by Marco » Sat Apr 15, 2017 6:22 pm

That's good news!
Scope 7 user since 2017 and Scope user since 1998. :o

User avatar
MrV
Posts: 183
Joined: Tue May 20, 2003 4:00 pm
Location: Sydney , Australia
Contact:

Re: Can I add a IO plate on a Sonic rocket booster

Post by MrV » Wed May 24, 2017 4:19 am

I've done it , works fine :)

fraz
Posts: 837
Joined: Fri Jun 03, 2005 4:00 pm
Location: Springfield !

Re: Can I add a IO plate on a Sonic rocket booster

Post by fraz » Sat May 27, 2017 10:39 am

Marco wrote:Can I add a IO plate on a Sonic rocket booster card to add more physical IO? If I have a spare part from an other card?
Is this referring to the ADAT expansion I/O plate usually used with Power Sampler / Scope Home 3 DSP PCI card?

On this plate is also 1 x Z-link connector for use with Luna II boxes !

User avatar
MrV
Posts: 183
Joined: Tue May 20, 2003 4:00 pm
Location: Sydney , Australia
Contact:

Re: Can I add a IO plate on a Sonic rocket booster

Post by MrV » Mon May 29, 2017 3:20 pm

No , not the Luna expansion plate ,, an actual daughter board with back plate , in my case it's from a dead Scope Pro
card , but the daughter board still works ok .

Michael

Post Reply