Can I add a IO plate on a Sonic rocket booster
Can I add a IO plate on a Sonic rocket booster
Can I add a IO plate on a Sonic rocket booster card to add more physical IO? If I have a spare part from an other card?
out and about for music production. Are you still configguring your Studio music first!
Re: Can I add a IO plate on a Sonic rocket booster
yes. it will work 99% of the time. since the cards were made at different times, there may be some (ever so slightly)different parts used. a few i/o plates don't work with a few cards, but i've never seen that myself.
Re: Can I add a IO plate on a Sonic rocket booster
That's good news!
out and about for music production. Are you still configguring your Studio music first!
Re: Can I add a IO plate on a Sonic rocket booster
I've done it , works fine
Re: Can I add a IO plate on a Sonic rocket booster
Is this referring to the ADAT expansion I/O plate usually used with Power Sampler / Scope Home 3 DSP PCI card?Marco wrote:Can I add a IO plate on a Sonic rocket booster card to add more physical IO? If I have a spare part from an other card?
On this plate is also 1 x Z-link connector for use with Luna II boxes !
Re: Can I add a IO plate on a Sonic rocket booster
No , not the Luna expansion plate ,, an actual daughter board with back plate , in my case it's from a dead Scope Pro
card , but the daughter board still works ok .
Michael
card , but the daughter board still works ok .
Michael