I didn't want to totally hijack the laptop thread so I thought I'd start a new one
1) What connector type does the ExpressCard use to connect to the Xite-1? Is it HDMI like on the PCIe card?
2) If answer to 1 is yes, can I use my 5m HDMI cable that I'm currently using for the PCIe card or is there a length limit?
Cheers.
Questions about the ExpressCard
Re: Questions about the ExpressCard
1) No, it's a mini hdmi to hdmi just like todays digital cameras have
2) Therefore no, you can't use the same cable AND maximum cable lenght is about 1.8 meters for the express card, if I remember well.
2) Therefore no, you can't use the same cable AND maximum cable lenght is about 1.8 meters for the express card, if I remember well.
Re: Questions about the ExpressCard
Thanks Katano,katano wrote:1) No, it's a mini hdmi to hdmi just like todays digital cameras have
2) Therefore no, you can't use the same cable AND maximum cable lenght is about 1.8 meters for the express card, if I remember well.
Damn, 1.8m isn't long enough for me
Re: Questions about the ExpressCard
just ask S|C about the maximum lenght, maybe longer's possible...
btw here's a thread I started a while ago, you'll also find a pic of the cable an card I took back then:
http://forums.planetz.com/viewtopic.php?f=36&t=28688
Cheers
btw here's a thread I started a while ago, you'll also find a pic of the cable an card I took back then:
http://forums.planetz.com/viewtopic.php?f=36&t=28688
Cheers
Re: Questions about the ExpressCard
Cheers, Katano.katano wrote:just ask S|C about the maximum lenght, maybe longer's possible...
btw here's a thread I started a while ago, you'll also find a pic of the cable an card I took back then:
http://forums.planetz.com/viewtopic.php?f=36&t=28688
Cheers
It looks like it could work quite well but 1.8m is not long enough for my setup unless I place the laptop ontop of the rack unit that houses the Xite-1 which wouldn't make it convenient for me.
I want to make my main DAW machine 64bit (for various reasons) and use another machine purely for running Xite-1 and have it connected to my main DAW via lightpipe. Laptop would be ideal if I could have a minimum of 3m.
Another idea I had was setting up a headless computer (without monitor, keyboard and mouse) and connect to it via VNC for any configuration or tweaking of settings.