PlanetZ@scopeusers.com

Scope Users Community
It is currently Sun Dec 10, 2017 7:47 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Mixers
PostPosted: Sat Oct 24, 2009 8:56 pm 
Offline
User avatar

Joined: Wed Jun 05, 2002 4:00 pm
Posts: 1892
Location: VRRAAaaooO├┤Oooommmh
Hi...

There is no phase compensation button on the xite mixers... Is it because there is no problem of phase shifting ?


... I hope so ...

_________________
> > > > > > > > > > > > --- Musica --> here ! ---< < < < < < < < < < < <


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Sat Oct 24, 2009 9:32 pm 
Offline
User avatar

Joined: Sun Apr 15, 2001 4:00 pm
Posts: 21166
Location: ghetto by the sea
mixers can have their own chips on xite. the phase compensation was required because of latencies between chips(or so i understand it). no swindle there, anyway....


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Sat Oct 24, 2009 9:57 pm 
Offline
User avatar

Joined: Wed Jun 05, 2002 4:00 pm
Posts: 1892
Location: VRRAAaaooO├┤Oooommmh
Thanks... I didn't know that...

_________________
> > > > > > > > > > > > --- Musica --> here ! ---< < < < < < < < < < < <


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Sat Oct 24, 2009 10:24 pm 
Offline
User avatar

Joined: Sun Apr 15, 2001 4:00 pm
Posts: 21166
Location: ghetto by the sea
:)


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Sun Oct 25, 2009 1:57 am 
Offline
User avatar

Joined: Sun Jun 17, 2001 4:00 pm
Posts: 2460
it's may be because the module(s) that could cause phase shifting have been replaced by optimized modules that apparently don't require any special care ?
The phase shifting is not as simple as "in between two chips" (if you have the same device loaded several times on several chips, you would not have any different latency in the individual output of each of those modules (eventhough they are on different chips)... phase shifting was much more hearable when a plugin is loaded upon 2 cards in cascade (like, half of the plug on one card, the other half on another card...)...

_________________
plug-ins for scope


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Sun Oct 25, 2009 10:27 am 
Offline
User avatar

Joined: Wed Jun 05, 2002 4:00 pm
Posts: 1892
Location: VRRAAaaooO├┤Oooommmh
Mmm... Yes yes yes...

So it's simply better with new hardware...New chips...

Did you get your xite, Mehdi ?
I really think to have made a good investment... The xite + a good PC with the quad core CPU and I'm never stuck by power missing.

_________________
> > > > > > > > > > > > --- Musica --> here ! ---< < < < < < < < < < < <


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Sun Oct 25, 2009 10:40 am 
Offline
User avatar

Joined: Sun Jun 17, 2001 4:00 pm
Posts: 2460
not yet...my latest devices wouldn't be websites if i had one already ;-)
can't even make music anymore due to scope too small size for me now....

_________________
plug-ins for scope


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Mon May 16, 2016 9:16 am 
Offline

Joined: Wed Mar 20, 2013 5:44 pm
Posts: 111
Location: O'er The Town of Pedro
garyb wrote:
mixers can have their own chips on xite. the phase compensation was required because of latencies between chips(or so i understand it). no swindle there, anyway....


Hey Gary, Hope all is well !
I wondered if you could clarify 'phase compensation' on the xite-1 stm 4896x.

I am recording a 45 piece male shanty choir with a 4 piece band on Wednesday and will use the Xite-1, an A16 ultra and my old trusty soundtracs as preamps.
I will be using a main ortf pair combined with 3 spot mics for the choir.
On the old pci version of the stm 4896, the manual states that enabling phase compensation will reduce phase when multi miking one source, such as a piano. I would like to apply the same functionality to keeping the phase of the ortf pair in synch with the spot mics. Now that the function is missing from the mixer options, do i assume correctly that the stm now does this as default on the xite-1?

I understand the various theories of mic distancing ( 3:1 rule, ~1ms of delay per 1 foot dictance between the prime mics vs the others,etc etc) but reading the old manual, it does specify that it is useful for multi miking so the comments stating it only accounted for latency between the older dsp chips confused me a little.

Can you help clear my fog on this?

Thank you as usual in advance.


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Mon May 16, 2016 9:21 am 
Offline
User avatar

Joined: Sun Apr 15, 2001 4:00 pm
Posts: 21166
Location: ghetto by the sea
well, this is part of why all the worry about 100% phase coherence can be silly. in real life, there's no such thing.

yep, follow the basic principles of micing and the phase issues will be minimized. yes, the XITE's mixer's inputs are always phase compensated, so the inputs will be in phase and any anomolies will be from outside the XITE, or because of the use of plugins.


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Mon May 16, 2016 9:33 am 
Offline

Joined: Wed Mar 20, 2013 5:44 pm
Posts: 111
Location: O'er The Town of Pedro
Cheers. I was confused based on what I read in the manual to be honest.
It implies it will help reduce phase when multi miking (which i understood as the stm adding (x) ms delay to channels having the same source on different inputs) but I guess this isn't the case. So in fact it was a way of addressing inter chip latency when recording one source on a mixer in cases where the mixer is loaded across more than one dsp ?

I will humbly return to using my measure tape and calculator :-)
Thanks for clearing it up.


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Mon May 16, 2016 9:36 am 
Offline
User avatar

Joined: Sun Apr 15, 2001 4:00 pm
Posts: 21166
Location: ghetto by the sea
sure. :)

a measuring tape and calculator aren't needed, though. a good eyeball is sufficient. it is impossible to achieve "perfect".


Top
 Profile  
Reply with quote  
 Post subject: Re: Mixers
PostPosted: Mon May 16, 2016 9:44 am 
Offline

Joined: Wed Mar 20, 2013 5:44 pm
Posts: 111
Location: O'er The Town of Pedro
well, ok, not 'perfect' :-) 'perfect' normally isn't musical anyway :-)


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Donate to help support this community


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group