arpeggiate or sequence other synths with the noah

Martijns · Post by **Martijns** » Sun Oct 29, 2006 4:08 am

Hi,

Is it possible to arp or sequence other synths through the midi out of the Noah?
I tried it, but it seems that the noah does not send the data from its arp & sequence to my hardware synths, I hope I am wrong.

Best regards,

Martijn

HUROLURA · Post by **HUROLURA** » Sun Oct 29, 2006 6:23 am

Hi,

The trick I use to achieve that.

I do not actually use Noah physical MIDI Out but the USB out as this allow me to remap the output using one of my midi sequencer.

In the example bellow, I routed the NOAH seq Out to the USB of NOAH using the NOAH midi manager (see image).
Then in Samplitude I selected the USB NOAH in as an input on one track were the out is sent back to another hardware synth (a microQ actually) wich does echoes the seq.

Should work the same for the physical hardware midi out and also for arpegios...

Hope this would help...

CheerZ

Martijns · Post by **Martijns** » Mon Oct 30, 2006 8:03 am

I tried it with the sequencer and it worked, great! But unfortunately It did not work with the apreggiator. Did you tried it also with the arp?

Regards,

Martijn

HUROLURA · Post by **HUROLURA** » Mon Oct 30, 2006 12:59 pm

I will try in the next days....

CheerZ