cubase 4 and xtc mode

Discuss Scope XTC mode.

Moderators: valis, garyb

Post Reply
User avatar
the19thbear
Posts: 1403
Joined: Thu Feb 20, 2003 4:00 pm
Location: Denmark
Contact:

cubase 4 and xtc mode

Post by the19thbear »

hi.
cubase 4 and xtc mode. anybody got it working?
how?
thanks!
starcorp
Posts: 55
Joined: Tue Mar 11, 2008 6:05 am
Location: berlin
Contact:

Post by starcorp »

i was used it with nuendo 3 and now with nuendo 4. i made no changes to scope (4.5).
jan
Marvin
Posts: 65
Joined: Sun Feb 08, 2004 4:00 pm

Post by Marvin »

stardust wrote:I think brain reported to get it working with 44.1 kHz sampling rate
I got it working even with 48 KHz, but with the known workaround. So XTCPro has to be set on 44.1 (Scope as master in my setup) , if so starting Cubase 4.1 and then changing the Sync to slave in the settings (slaving to BNC in my setup > using a houseclock set on 48KHz connected to syncplate).
I needed about two days in searching and trying all the tricks posted on planetz. Now I'm very happy with XTC and won't go back to normal mode, as I've now only one mixer and don't have to flip back and forth through the apps. Most helpful was the user written XTC manual (posted from Gonzoft I think)
Post Reply