Studio chair

[wayne]

My cheeks reckon I need a new chair. Any good recommends? Especially those near the 6'5" 100kg mark garyb

Arms gotta be removable for spankin' the plank. Ergolab don't ship to Orstralya. Waaaa.

[dante]

Orstralya has Officeworks ! I got this office chair a decade ago there and the cushion for the cheeks - you'll need this no matter what brand u buy.

Arm rests don't seem to be an impediment to recording - I just need wireless headphones as the wires get tangled in the machine heads or in the chair legs

I have another smaller el cheapo one with no arms if required anyway.

Stoodio Chair

stoodio-chair.JPG (94.66 KiB) Viewed 5712 times

[stonberg]

I use a very cheap and cheerful old armless wooden chair that I found in a skip years ago and have re-upholstered a few times.

The secret ingredient is a 1.5" pressure relief cushion which transforms it into the epitome of comfort; I can sit in this chair for hours at a time with no discomfort at all. I also use a normal pillow to provide lower back support.

"But why should we accept your endorsement of using such a cushion?"

A good question! Because a couple years ago I broke my pelvis in half, snapped my coccyx off, fractured all my lumbar vertebrae and both knees (amongst other things). Thus if I can find a seat comfortable with all that going on, then anybody in a less broken state is bound to also find it very comfortable (the pressure relief cushion is the same type as was used in the wheelchair I had to use for a while).

[Nestor]

I would get one of these, there are many models, look for what you need, they are very good quality and extremely confortable as to work for many ours without pain:

http://www.dxracer.com/us/en-us/

[garyb]

those are nice.
i've been dealing with used office chairs..

[Nestor]

those are nice.
i've been dealing with used office chairs..

What do you mean?

[Nestor]

Wayne, have a look at these special models for your zise:

http://www.dxracer.com/us/en-us/product ... us_series/

[hubird]

Wayne, those wheel chairs are not cheap, I'd opt for 2nd hand, as Gary also says.
So much companies changing house style or going bankrupt.
Just check if the built in cushion still has it's resilience kept.

[garyb]

i mean hand-me-down chairs...

yes, those chairs are expensive, but i've found that cheap chairs aren't worth the money either....

[Eanna]

For me, office chairs, a neat size. No arm rests tho! Can't play bass with arm rests on!
Usually, you can simply remove arm rests, but in some you cannot.
If you'll be on the chair for extended periods, make sure heights etc. are ergonomic. Check out recommendations online, be aware of them at least. RSI (repetitive strain injury) is no joke.
So saying, I think the best practice is to have arm rests! :-O Guess I'm not an 'extended periods' type of guy!

[Nestor]

i mean hand-me-down chairs...

yes, those chairs are expensive, but i've found that cheap chairs aren't worth the money either....

Ok, I understand now, but of course, if new ones are already bad, how much worse used ones can be!

Seriously, if you have backache problems, it is indispensable to spend some money in a decent chair. The dxracer models I am pointing out, have not been chosen because they are fancy or nice looking game chairs, they are robust and very well balanced, extremely comfortable too, so your back is always in a perfect position. This pays you back with good levels of muscle rest and much less general tension once you have finished working after several hours sitting in front of your screens.

I consider your chair as important as your input interfaces, mouse and keyboard, they must be high quality or you will have a poor experience overall. Get one of them even if you have to make some effort to pay for it.

[hubird]

For me, office chairs, a neat size. No arm rests tho! Can't play bass with arm rests on!
Usually, you can simply remove arm rests, but in some you cannot.
If you'll be on the chair for extended periods, make sure heights etc. are ergonomic. Check out recommendations online, be aware of them at least. RSI (repetitive strain injury) is no joke.
So saying, I think the best practice is to have arm rests! :-O Guess I'm not an 'extended periods' type of guy!

I removed the left arm rest, but kept the right one for supporting the mouse arm.
Had rsi manifesting once, it's quite painful, like needles in your arm

[GordonGekko]

given your skill set you should not settle for less than this:





As for playing bass, a chainsaw would seem most appropriate.

[garyb]

a gilt throne is pretty nice, but i don't think it's too comfortable....
the last owner didn't mind because he was dead...

[hubird]

Mwa, no wheels

[garyb]

no, it uses pop-in casters...

[fra77x2]

This is my choice:

https://en.wikipedia.org/wiki/Standing_desk

[pwhitmaker]

IKEA has chairs that are approved for office work, and at a good price´.
Im planning to buy one of those:
http://www.ikea.com/se/sv/catalog/products/10173769/
http://www.ikea.com/us/en/catalog/products/40173777/

[ronnie]

I've been using this for a couple of years and it is wonderful for your posture. Great lumbar support. Very comfortable. Easy to adjust for anybody. (I'm 6'1" and 195lbs). The arms go down enough not to interfere with keyboard or guitar playing and can stay up at the exact height to keep your arms at the ideal level for keyboard, mouse, trackball, fader use. The price is not exactly cheap but compared to similar featured mesh "studio" chairs with good adjustability and lumbar support, it's a steal.

Staples-Carder-Mesh-Task-Chair-Black




Modern Ergonomic Mesh Office Chair

Work comfortably at home or the office with the Staples Carder Mesh Office Chair. Ideal for those who spend long hours sitting at a desk, this ergonomic office chair offers a contoured seat with molded mesh chair back, adjustable padded arms, a tilt-and-lock option, and adjustable seat height. Its durable five-star base with carpet casters stands up to heavy loads. Crafted from highly breathable mesh material, this Staples office chair meets or exceeds all ANSI/BIFMA standards.

• Ergonomic office chair with molded back for fixed lumbar support
• Adjustable seat height, arms, and tilt and lock for comfort
• Breathable, lightweight mesh back and Fabric Seat
• Five-star base with carpet casters for stability
• Weight rated up to 250 pounds for up to 5 hours of use per day
• Color: Black
• Meets or exceeds all ANSI/BIFMA standards
• Staples Brand 100% Satisfaction Guaranteed
• Seat Size: 16.1" - 19.7" H x16.9" W x 15.4" D
• Back Size: 21.5-24" H x 18.5" W
• Dimensions: 38.2" - 44.3" H x 25.6" W x 24.4" D
• 7-years limited manufacturer's warranty
• Assembly required

Adjustable Seat, Arms, and Tilt Provide Back Support
The computer chair's control mechanisms allows you to adjust the seat height and tilt and lock the chair in a semi-reclining position. Its ergonomic molded mesh back supports your back. Adjustable padded arms provide a comfortable resting place.

Breathable Mesh Keeps You Cool
Made from breathable black mesh upholstery, the Staples Carder Mesh Office Chair keeps you cool and comfortable, while giving the chair a modern, stylish look.

[yayajohn]

A-Very-High-Tech-Office-Chair.jpg (23.67 KiB) Viewed 5325 times