Hi,
maybe they already exists. But I could find them via search.
I'm looking for a tape sat plugin and a linear phase Eq for scope.
Thanks
Thomas
Lin phase EQ and Tape Saturation
Re: Lin phase EQ and Tape Saturation
ConvolveQ is a Linear Phase EQ (and more):
http://www.sonic-core.net/shop/product_ ... olveQ.html
http://www.hitfoundry.com/issue_10/cnv_mast.htm
Tape Saturation? Not aware of any device designed for this in Scope per se, but it'll be handy enough to simulate... Roll off the top end with an EQ, compress the mid range, mix in some noise from a simple oscillator, add a bit of sheen with PsyQ if you feel it's missing, stick a soft clip limiter at the end of the chain... You can help to increase loudness before a compressor with some Overdrive, or SpaceF's Fat Inserts, which sounds great on pretty much everything!
Adern's very cool Music Pack - with the thinking-outside-the-box FatCat compressor (increasing the volume of quite signals rather than reducing the volume of the loud signals, which might increase noise, which is desirable in this instance), Sat for straight-up saturation, and a nice 5-band EQ, might well be a one-stop solution...
http://www.adern.com/home/modules.php?n ... view&id=27
There are tape sims, like Celmo's, that might help to get you there too:
http://www.celmo.com/Tape_Echo_Sim_page.html
Notice Wow and Flutter controls...
http://www.sonic-core.net/shop/product_ ... olveQ.html
http://www.hitfoundry.com/issue_10/cnv_mast.htm
Tape Saturation? Not aware of any device designed for this in Scope per se, but it'll be handy enough to simulate... Roll off the top end with an EQ, compress the mid range, mix in some noise from a simple oscillator, add a bit of sheen with PsyQ if you feel it's missing, stick a soft clip limiter at the end of the chain... You can help to increase loudness before a compressor with some Overdrive, or SpaceF's Fat Inserts, which sounds great on pretty much everything!
Adern's very cool Music Pack - with the thinking-outside-the-box FatCat compressor (increasing the volume of quite signals rather than reducing the volume of the loud signals, which might increase noise, which is desirable in this instance), Sat for straight-up saturation, and a nice 5-band EQ, might well be a one-stop solution...
http://www.adern.com/home/modules.php?n ... view&id=27
There are tape sims, like Celmo's, that might help to get you there too:
http://www.celmo.com/Tape_Echo_Sim_page.html
Notice Wow and Flutter controls...
Not because it is easy, but because it is hard...
- Mr Arkadin
- Posts: 3280
- Joined: Thu May 24, 2001 4:00 pm
Re: Lin phase EQ and Tape Saturation
ScopeRise is your friend:
http://www.hitfoundry.com/issue_14/mra_mast.htm
Under Stereo Effects 1>Distortion there is "Tube Taper 01f" device and under DAS>Distortion there is "Digital Analog Sound" device:
Under Mono Effects>Distortion there is "Tube Taper M" device and under "Legacy" there are "Tube Taper v03" and "Tube Taper v04" devices:
http://www.hitfoundry.com/issue_14/mra_mast.htm
Under Stereo Effects 1>Distortion there is "Tube Taper 01f" device and under DAS>Distortion there is "Digital Analog Sound" device:
Under Mono Effects>Distortion there is "Tube Taper M" device and under "Legacy" there are "Tube Taper v03" and "Tube Taper v04" devices:
Last edited by Mr Arkadin on Fri Mar 01, 2013 2:28 am, edited 2 times in total.
- the19thbear
- Posts: 1403
- Joined: Thu Feb 20, 2003 4:00 pm
- Location: Denmark
- Contact:
Re: Lin phase EQ and Tape Saturation
There is also DAS free tape sim. It doesnt emulate the overall tape saturation but rather the bias control - which it is doing amazingly accurate! I have never heard any other plugin, vst or scope that gives you that hi freq "expensive" sheen that that plugin delivers.
Re: Lin phase EQ and Tape Saturation
Mix the DAS Plug with a FAT II-S or Sat.