Such simple as SD800
Does anyone have a link for that?
Also Dual-mono (integrated pot.) version might be usable..
Which values in milliseconds you have measured when setting your Sub(s) in sync with mains?
Sample delay Plug for speaker system alignment
Sample delay Plug for speaker system alignment
Scope 7
2 x Pulsar 6dsp
Cubase / Live / Premiere
2 x Pulsar 6dsp
Cubase / Live / Premiere
Re: Sample delay Plug for speaker system alignment
Check ReD_MuZe's Phase Fix. The page is a bit garbled, but you can find the file's url and it's still there.
It's not specifically for a sub, but you can use it Mono as 0-200 samples delay on the sub, or as stereo on the stereo monitor - whichever is closer to you. To know the amount of samples to delay, sound travels at 1ft/ms...
I edited this and added some simple math:
@ 44.1kHz, 44100 samples per second.
-> 1ms or 1ft equals 44 samples
-> speakers 3ft or 1m closer can be delayed about 3x44 or ~ 130samples.
@ 96kHz, 1ft ~ 96 samples
-> 1m ~ 290 samples
It's not specifically for a sub, but you can use it Mono as 0-200 samples delay on the sub, or as stereo on the stereo monitor - whichever is closer to you. To know the amount of samples to delay, sound travels at 1ft/ms...
I edited this and added some simple math:
@ 44.1kHz, 44100 samples per second.
-> 1ms or 1ft equals 44 samples
-> speakers 3ft or 1m closer can be delayed about 3x44 or ~ 130samples.
@ 96kHz, 1ft ~ 96 samples
-> 1m ~ 290 samples
more has been done with less
https://soundcloud.com/at0m-studio
https://soundcloud.com/at0m-studio