Page 1 of 1

Lost the hardware manual, about pulsar 2 adt i/o

Posted: Tue Jul 16, 2013 9:22 am
by Shtaynz®
Hello
During lots of movings, i lost the hardware book that shows you where are the adat a in/out and adat b in/out.....http://forums.planetz.com/posting.php?mode=post&f=21#
Recently, I bought an a16 ultra and don't know where to plug my fibre cables......

Thanks for your help

Re: Lost the hardware manual, about pulsar 2 adt i/o

Posted: Tue Jul 16, 2013 10:46 am
by garyb
there are indicators in the Scope routing window.
connect an output from the A16 to one of the ADAT ports. if one of the lights next to ADAT A or B lights up in the samplerate window, you have found an input. the matching output is right next to the input.

Re: Lost the hardware manual, about pulsar 2 adt i/o

Posted: Tue Jul 16, 2013 12:44 pm
by dante
For more detail...

ftp://sonic-core.net/manuals/Triple_LE/ ... ectors.pdf

...check out pages 3 and 4 - depending on your hardware (e.g. Classic 20 vs Plus)

And for the A16 Ultra...

ftp://sonic-core.net/manuals/A16_Conver ... nglish.pdf