Re: Hardware Contol of STM mixer with M-Audio Keystattion Pr
Posted: Thu May 05, 2011 2:42 pm
Not the synth per se, but the routing it might use.
Pulsar MIDI Source > Merger L > Merger Out > j9k input 2
Seq MIDI Source > MIDI Filter I > j9k input 1
.......................................... > Merger R
Now take those 2 merged signals > MIDI Filter II.
MIDI FIlter II > j9k input 3
..................> STM2448 MIDI In
...................> MIDI Filter III > j9k input 4
........................................ > Seq MIDI Destination
..................> MIDI Filter IV > j9k input 5
........................................> Pulsar MIDI Dest ( out to hardware )
Pulsar MIDI Source > Project Preset List
This is how you can see all MIDI from various sources, Filter it and
basically use a single project for all of your needs, including gigs
with external hardware synths automated by a DAW or Scope.
Project Preset List takes a snapshot of current screen. It can only be used
on MIDI Channel 1.
Example 1: You are recording into a DAW where there are already MIDI
automations. You do not want the Sequencer Source module sending data
into the stream coming from your KS88.....this causes stacking and feedback.
So check the all box and the DAW sends only audio, no MIDI.
Now here's what the 17 buttons are the KS88 are for.
Go to Global Channel Button and hit once. It needs to be set to Channel 1.
Hitting it twice shows the channel of a selected zone, which we don't need now,
so tap it once. Once that first tap reads back Channel 1, you push button 1-17
to call up 17 different presets on that Channel.
So say you have a synth on Channel 4.
Push the Global Channel once, + or - to get the channel set, then buttons will
send preset 1-17 to that synths................Esta Bien..?
That'll keep you busy for another night.
DL the files below, as they are crucial for realtime work.
Pulsar MIDI Source > Merger L > Merger Out > j9k input 2
Seq MIDI Source > MIDI Filter I > j9k input 1
.......................................... > Merger R
Now take those 2 merged signals > MIDI Filter II.
MIDI FIlter II > j9k input 3
..................> STM2448 MIDI In
...................> MIDI Filter III > j9k input 4
........................................ > Seq MIDI Destination
..................> MIDI Filter IV > j9k input 5
........................................> Pulsar MIDI Dest ( out to hardware )
Pulsar MIDI Source > Project Preset List
This is how you can see all MIDI from various sources, Filter it and
basically use a single project for all of your needs, including gigs
with external hardware synths automated by a DAW or Scope.
Project Preset List takes a snapshot of current screen. It can only be used
on MIDI Channel 1.
Example 1: You are recording into a DAW where there are already MIDI
automations. You do not want the Sequencer Source module sending data
into the stream coming from your KS88.....this causes stacking and feedback.
So check the all box and the DAW sends only audio, no MIDI.
Now here's what the 17 buttons are the KS88 are for.
Go to Global Channel Button and hit once. It needs to be set to Channel 1.
Hitting it twice shows the channel of a selected zone, which we don't need now,
so tap it once. Once that first tap reads back Channel 1, you push button 1-17
to call up 17 different presets on that Channel.
So say you have a synth on Channel 4.
Push the Global Channel once, + or - to get the channel set, then buttons will
send preset 1-17 to that synths................Esta Bien..?
That'll keep you busy for another night.
DL the files below, as they are crucial for realtime work.