Routing the Scope?
I would like to ask for suggestion in patching my scope internal routing systems.
I use Nuendo2 and Gigastudio with 2 Creamware cards (Pulsar2 Z-link & Luna2) & Motu 2408 MKII on the same PC. At this moment, I use the Motu as my Gigastudio audio analog outputs to Luna2 as my Nuendo2 audio analog I/Os. I was thinking to add one more synth, the Creamware Modular. Is it possible to run the Nuendo2, Gigastudio, & Creamware Modular synths at the same time on the same machine? How do you route that internal & external?
I use Nuendo2 and Gigastudio with 2 Creamware cards (Pulsar2 Z-link & Luna2) & Motu 2408 MKII on the same PC. At this moment, I use the Motu as my Gigastudio audio analog outputs to Luna2 as my Nuendo2 audio analog I/Os. I was thinking to add one more synth, the Creamware Modular. Is it possible to run the Nuendo2, Gigastudio, & Creamware Modular synths at the same time on the same machine? How do you route that internal & external?
- next to nothing
- Posts: 2521
- Joined: Mon Jul 29, 2002 4:00 pm
- Location: Bergen, Norway
- paulrmartin
- Posts: 2445
- Joined: Sun May 20, 2001 4:00 pm
- Location: Montreal, Canada
I tried the MOTU before getting a 01V. The MOTU installation was a runaround, hardware found install drivers and software. Fire up the software, hardware not found....10 times around like this and back to the store it went.On 2005-03-01 19:12, piddi wrote:
correct.
motu might be fine for other in/outs though.
true.
the scope environment is really easy. it cables and behaves just like the real room you are sitting in.
a sequencer is just another virtual device in the scope environment(a sequencer is kinda like a vs-880 with midi or a qy7 with audio). the io modules(asio,wav and seq. midi) are the cable ports for the sequencer(or other program). multiple wav and sequencer midi modules can be used by multiple programs(or the same program) but asio can be used by only one program. the number of asio ports can be any number between 2 and 64 that you like however, and you CAN use both wav and asio modules(for multiple programs) if you wish.
scope devices(synths, midi devices, mixers, effects, amps) can cable to your software and hardware(real world) ports in anyway you wish, excepting midi has to connect to midi, audio to audio, and in to out/out to in, just like in a real room.
have fun, you can do almost whatever you might want to....
<font size=-1>[ This Message was edited by: garyb on 2005-03-02 19:18 ]</font>
the scope environment is really easy. it cables and behaves just like the real room you are sitting in.
a sequencer is just another virtual device in the scope environment(a sequencer is kinda like a vs-880 with midi or a qy7 with audio). the io modules(asio,wav and seq. midi) are the cable ports for the sequencer(or other program). multiple wav and sequencer midi modules can be used by multiple programs(or the same program) but asio can be used by only one program. the number of asio ports can be any number between 2 and 64 that you like however, and you CAN use both wav and asio modules(for multiple programs) if you wish.
scope devices(synths, midi devices, mixers, effects, amps) can cable to your software and hardware(real world) ports in anyway you wish, excepting midi has to connect to midi, audio to audio, and in to out/out to in, just like in a real room.
have fun, you can do almost whatever you might want to....
<font size=-1>[ This Message was edited by: garyb on 2005-03-02 19:18 ]</font>
- Mr Arkadin
- Posts: 3280
- Joined: Thu May 24, 2001 4:00 pm
I have 2 Creamware cards installed in my PC, the LUna2 & Pulsar2, but I use the Luna's analog I/O, instead of the Pulsar's.
The problem is in my Gigastudio, there is only 2 hardware options: Motu2408 & Scope/Pulsar Multichannel Driver. There is no Luna option and it doesn't sound, no signal in the STM mixer. I'm using the Gigasampler.pro setup in the scope window, so I'm pretty sure there is no problem with the scope routing.
hc.
The problem is in my Gigastudio, there is only 2 hardware options: Motu2408 & Scope/Pulsar Multichannel Driver. There is no Luna option and it doesn't sound, no signal in the STM mixer. I'm using the Gigasampler.pro setup in the scope window, so I'm pretty sure there is no problem with the scope routing.
hc.
Can you guys see this image?
http://www.planetz.com/forums/viewtopic ... &0&start=0
http://www.planetz.com/forums/viewtopic ... &0&start=0