Does I/O expansion board can be moved from one card to another one?
IE Pulsar II with 2 ADAT IO boardcan be replaced by 1 ADAT IO and 2 Zlink board ?
I/O expansion board & PCI Cards (ADAT, Z-Link ...)
I/O expansion board & PCI Cards (ADAT, Z-Link ...)
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Re: I/O expansion board & PCI Cards (ADAT, Z-Link ...)
never tried, but it should.
Wait for Gary or someone else for confirmation.
Wait for Gary or someone else for confirmation.
Re: I/O expansion board & PCI Cards (ADAT, Z-Link ...)
yes, the i/o cards can be swapped in most 6/14/15 dsp cards.
Re: I/O expansion board & PCI Cards (ADAT, Z-Link ...)
Good news ! Is there any pre check (ie HW revision ) to check ?
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Re: I/O expansion board & PCI Cards (ADAT, Z-Link ...)
no.
you have to try it. the chances of it not working are small.
you have to try it. the chances of it not working are small.