Masterverb Test Thread
-
- Posts: 624
- Joined: Sun Jan 06, 2002 4:00 pm
- Location: germany, east
The main power of AD and WD boards is the native performance, even @ 4ms lantencyOn 2006-02-28 02:45, Shroomz wrote:
hence, I'd imagine it's having 'disabled' virtually all mobo components that aren't needed, that gives us 14 MVs on the old NV2 A7N8X. Same probably applies to the system AndreD built for HerVoigt.
- Gordon Gekko
- Posts: 1085
- Joined: Fri Jan 11, 2002 4:00 pm
- Location: paname
- Gordon Gekko
- Posts: 1085
- Joined: Fri Jan 11, 2002 4:00 pm
- Location: paname
- Gordon Gekko
- Posts: 1085
- Joined: Fri Jan 11, 2002 4:00 pm
- Location: paname
-
- Posts: 217
- Joined: Fri Feb 15, 2002 4:00 pm
- Contact:
- HP/Compaq system with Pentium 4 2.66 and 1GB RAM (don't know which motherboard)
- Matrox G550
- Pulsar 2 and Scope SRB
18 masterverbs loaded with a bit of optimizing. DSP memory limit reached before PCI overflow.
sidenote: This (cheap-ass, stock) PC has been really amazing to me. I've been running it for over 2 years now and it never failed on me, everything runs extremely smooth and stable (both Creamware and sequencing/hd-recording).
At first I Creamwarized it as a temporary solution (I wanted to custom-build a machine for my Creamware cards) but I ran so beautifully I never got to that point!
- Matrox G550
- Pulsar 2 and Scope SRB
18 masterverbs loaded with a bit of optimizing. DSP memory limit reached before PCI overflow.
sidenote: This (cheap-ass, stock) PC has been really amazing to me. I've been running it for over 2 years now and it never failed on me, everything runs extremely smooth and stable (both Creamware and sequencing/hd-recording).
At first I Creamwarized it as a temporary solution (I wanted to custom-build a machine for my Creamware cards) but I ran so beautifully I never got to that point!
1. AMD64 3500MHz, MSI K8N NEO4 Platinum nForce4 (socet 939), 2x512 ram Kingston
2. Pulsar2 + Pulsar2(12 dsp) + 2xUAD-1
3. GeForce 6200 (passive heatsink)
4. 16 Masterverbs. No PCI band overflow.
2. Pulsar2 + Pulsar2(12 dsp) + 2xUAD-1
3. GeForce 6200 (passive heatsink)
4. 16 Masterverbs. No PCI band overflow.
4PC + Scope 5.0 + no more Xite + 2xScope Pro + 6xPulsarII + 2xLunaII + SDK + a lot of devices (Flexor III & Solaris 4.1 etc.) + Plugiator.
Cool .
I had to re-check to be sure, and I can load 16 without problems. And for what it's worth, the project wasn't completely empty - I had some ASIO- and WDM-drivers, as well as a Switch-it, loaded.
Both cards share IRQ 5. I have also disabled some USB-controllers I don't use. And I did some basic audio-optimizing when I installed the system. But it's starting to become a long time ago.
GPU in the AGP-slot is a Sapphire Radeon 9600 Pro Atlantis with 128MB.
I had to re-check to be sure, and I can load 16 without problems. And for what it's worth, the project wasn't completely empty - I had some ASIO- and WDM-drivers, as well as a Switch-it, loaded.
Both cards share IRQ 5. I have also disabled some USB-controllers I don't use. And I did some basic audio-optimizing when I installed the system. But it's starting to become a long time ago.
GPU in the AGP-slot is a Sapphire Radeon 9600 Pro Atlantis with 128MB.
1) IBM NetVista (chipset class: intel 82845 G/GL/GE/PE/GV/E), Pentium 4 2.5Ghz (not with HT), 1 gb ddr. I dont have a clue about mother board. But its a prebuild ibm with build in Intel Extreme Graphics (which is disabled)
2) 1x pulsar2, 2xlunar2 with 1 stdm connecting them all
3)GeForce4 Ti 4800SE
4)12 MasterVerbs on 13/14 i got pci capacity limit reached.
no os tweaks done. running usb midi in/out, usb midi controller and usb wlan.
is there any gain in using two stdm cables?
http://www-307.ibm.com/pc/support/site. ... yle=lenovo
link to the pc model on lenovos pages
<font size=-1>[ This Message was edited by: ehasting on 2006-07-02 10:49 ]</font>
2) 1x pulsar2, 2xlunar2 with 1 stdm connecting them all
3)GeForce4 Ti 4800SE
4)12 MasterVerbs on 13/14 i got pci capacity limit reached.
no os tweaks done. running usb midi in/out, usb midi controller and usb wlan.
is there any gain in using two stdm cables?
http://www-307.ibm.com/pc/support/site. ... yle=lenovo
link to the pc model on lenovos pages
<font size=-1>[ This Message was edited by: ehasting on 2006-07-02 10:49 ]</font>
1)Abit AG8 (3rd Eye), 1Gb DDR333, P4 3Ghz
2)Pulsar2 + Luna2 (9 DSP's)
3)Ati Radeon X300 (to be replaced...)
4)12 Masterverbs, 9 Masterverb Pro's
This is the best benchmarked motherboard I've used, but sadly only 2 pci slots on this mobo....
<font size=-1>[ This Message was edited by: mjproc on 2006-07-05 01:39 ]</font>
<font size=-1>[ This Message was edited by: mjproc on 2006-07-05 01:39 ]</font>
<font size=-1>[ This Message was edited by: mjproc on 2006-07-05 01:52 ]</font>
2)Pulsar2 + Luna2 (9 DSP's)
3)Ati Radeon X300 (to be replaced...)
4)12 Masterverbs, 9 Masterverb Pro's
This is the best benchmarked motherboard I've used, but sadly only 2 pci slots on this mobo....
<font size=-1>[ This Message was edited by: mjproc on 2006-07-05 01:39 ]</font>
<font size=-1>[ This Message was edited by: mjproc on 2006-07-05 01:39 ]</font>
<font size=-1>[ This Message was edited by: mjproc on 2006-07-05 01:52 ]</font>