Page 1 of 1
Free Compressor Black Alpha corrected
Posted: Sun Apr 13, 2014 12:10 am
by Peter4724
A big mistake.
The MIX Potti had no function.
This is the corrected version.
Hi
Another sounding Compressor. Placed two "Bands" on the side and middle signal.
Have fun
r
Peter
- Black Alpha.PNG (187.2 KiB) Viewed 5965 times
Re: Free Compressor Black Alpha
Posted: Mon Apr 14, 2014 8:41 am
by JoPo
Fan-ta-s-ti-K !!
Re: Free Compressor Black Alpha
Posted: Thu Apr 17, 2014 2:53 am
by Yogimeister
Thank you !
Re: Free Compressor Black Alpha
Posted: Fri Apr 18, 2014 11:09 pm
by ehasting
Bang on! Great sounding compressor... and also very nice looking!
It really helps giving that "thump" sound to the bottom, and sound cool when driven hard!
Thanks
Re: Free Compressor Black Alpha
Posted: Sat Apr 19, 2014 12:32 am
by Yogimeister
Still exploring it ...
One thing though ... When i tweak the m/s to the left side (mono) i seem to be getting the output panned left ....
(Does this enable processing only on the left channel ?(??) )
Re: Free Compressor Black Alpha corrected
Posted: Sat Apr 19, 2014 8:26 am
by Peter4724
Yogimeister wrote:Still exploring it ...
One thing though ... When i tweak the m/s to the left side (mono) i seem to be getting the output panned left ....
(Does this enable processing only on the left channel ?(??) )
I can not find this problem but have another error noticed.
The MIX Potti had no function.
I corrected it.
Re: Free Compressor Black Alpha corrected
Posted: Sat Apr 19, 2014 8:30 am
by ehasting
Thanks regarding the mix pot.. not that i minded it when i used it, since i wanted all on.. but mix pot gives more options!
thanks.
Re: Free Compressor Black Alpha corrected
Posted: Sat Apr 19, 2014 9:06 am
by Yogimeister
Peter4724 wrote:
I can not find this problem but have another error noticed.
The MIX Potti had no function.
I corrected it.
Hehe thanx ... I didnt get to the stage of mixing it "out" yet ... Am still learning how to use it in 100% mix
I will reDL and see if I can display the behavior I encountered ....
But basically - what does the m/s knob do ?
(Feeds m or s into the "sidechain" ? Or m/s control of the signal (both in and out ?)
Re: Free Compressor Black Alpha corrected
Posted: Mon Apr 21, 2014 12:11 am
by Peter4724
Yogimeister wrote:But basically - what does the m/s knob do ?
(Feeds m or s into the "sidechain" ? Or m/s control of the signal (both in and out ?)
The M / S mode knob turned to the left reduces the current threshold value from the side signal.
Right turned the threshold of the middle signal is reduced.
Re: Free Compressor Black Alpha corrected
Posted: Mon Apr 21, 2014 4:24 am
by Yogimeister
Thank you
Does the compressor work on both bands seperately - or is there one single compression (attenuation) stage that will works on both bands (but reacts to a function of two different attenuation signal feeds?
(I couldnt understand if thats what you meant by two "bands" on m/s - or if u were referring to the bass band and the "else" band
Re: Free Compressor Black Alpha corrected
Posted: Mon Apr 21, 2014 10:36 pm
by Peter4724
Yogimeister wrote:Thank you
Does the compressor work on both bands seperately - or is there one single compression (attenuation) stage that will works on both bands (but reacts to a function of two different attenuation signal feeds?
(I couldnt understand if thats what you meant by two "bands" on m/s - or if u were referring to the bass band and the "else" band
Here's the signal flow.
Signal input - high / low pass filter - 2-band frequency separation - M/S separation for each frequency band -
a compressor on the high and a compressor on the low for each M/S Signal.........out.
Re: Free Compressor Black Alpha corrected
Posted: Tue Apr 22, 2014 11:07 pm
by Yogimeister
Cool ... Thanks!
(If this is the case - may i suggest a seperate m/s control knob for high & low bands - to be able to tighten the mono image on low and expand the highs a bit