SPINNER (4-mode filter pan mod FX) - UPDATED 31/03/09

Scope device files created using the Scope SDK
User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

SPINNER (4-mode filter pan mod FX) - UPDATED 31/03/09

Post by Shroomz~> » Fri Mar 27, 2009 12:24 pm

Hi,

SPINNER is a FAT 24dB multimode resonant filter with Low Pass, High Pass, Band Pass & Notch modes

Frequency range - 20 Hz to 20 kHz
Modulation frequency range 0.1 Hz to 1.0 Hz
Spread parameter - 0 to max (spreads frequency of poles 3&4 away from poles 1&2)


Let me know what you think & if you find any issues or problems.

~Mark
SPINNER.zip
Updated on 31/03/09 - Presets now load with device. Added WET/DRY mix, altered max resonance & updated GUI.
(604.41 KiB) Downloaded 962 times
SPINNER_DEF1_presets.zip
(1.48 KiB) Downloaded 849 times
SPINNERscreenshotNEW01.jpg
image is 80% scale.
SPINNERscreenshotNEW01.jpg (119.83 KiB) Viewed 8102 times

Updated on 28/03/09
- fixed a couple of things that I'd forgotten about & added preset capability.

29/03/09 - Added a set of 58 Default presets. Download the 'SPINNER_DEF1_presets.zip' file & extract it to your Scope presets folder.

Updated on 29/03/09
- Fixed filter type switching issue. Now it works properly.

Updated on 31/03/09
- Presets now load with device. Added WET/DRY mix, altered max resonance & updated GUI.
Last edited by Shroomz~> on Tue Mar 31, 2009 12:44 pm, edited 14 times in total.

User avatar
the19thbear
Posts: 1331
Joined: Thu Feb 20, 2003 4:00 pm
Location: Denmark
Contact:

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by the19thbear » Fri Mar 27, 2009 1:26 pm

once again shroomz! if i had a hat, i would take it off right now!
looks great! reminds me of the filter on the new minimoogs, with the stereo spread!
cant wait to use it!!! ( havent used it yet though..)

User avatar
Mr Arkadin
Posts: 3192
Joined: Thu May 24, 2001 4:00 pm

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by Mr Arkadin » Fri Mar 27, 2009 2:26 pm

Great stuff. The only initial niggles are that when i right-click to open the presets list i get the presets for XTreme Cut Pro. Also (v. minor) i find it distracting that the Type LED flickers as well as changing the other LEDs - not a biggy that one :lol:.

dawman
Posts: 12886
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by dawman » Fri Mar 27, 2009 3:31 pm

It's my new Leslie Emu.
I got 3 of these FAT BASTARDS trying to doppler.
It would need the faster rate altered but the controls are all there.
It has the XTreme's panning feature that I thought was wicked.
01-090328_1517.mp3
Thanks Shroomz this is a much better way to get full sounds w/o coloring or cutting as an EQ would do.
Filters are the shit.
I am trying to do the rare and old Psychedelic Leslie that was 3 x 15 inch woofers spinning w/ Black Lights and colors. I band for each speaker......Coolness.

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by Shroomz~> » Fri Mar 27, 2009 4:00 pm

Mr Arkadin wrote:Great stuff. The only initial niggles are that when i right-click to open the presets list i get the presets for XTreme Cut Pro. Also (v. minor) i find it distracting that the Type LED flickers as well as changing the other LEDs - not a biggy that one :lol:.
Hi Mr. A,

It's not Xtreme Cut Pro under the hood FWiW (but I see that Jimmy V already sussed that out from his post. :cool: ).
The short explanation is that I now use Xtreme Cut as a shell/starting point for stereo insert effects because it has everything I need in there, such as required midi modules & also has Scope remembering midi CC assignments on project save/reload. I just forgot to delete the preset list from the empty shell.. I'll fix that & upload a new version with any other issues fixed as well. Man, I need to remember to save it as my new empty insert effect module this time... doh!

~Mark
(been away from sdk for too long) :wink:

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by Shroomz~> » Fri Mar 27, 2009 4:10 pm

XITE-1/4LIVE wrote:It's my new Leslie Emu.
I got 3 of these FAT BASTARDS trying to doppler.
It would need the faster rate altered but the controls are all there.
It has the XTreme's panning feature that I thought was wicked.

Thanks Shroomz this is a much better way to get full sounds w/o coloring or cutting as an EQ would do.
Filters are the shit.
I am trying to do the rare and old Psychedelic Leslie that was 3 x 15 inch woofers spinning w/ Black Lights and colors. I band for each speaker......Coolness.
Many thanks to you JV for the inspiration. If it wasn't for your feedback about panning modulation possibilities on Xtreme Cut, this device wouldn't have happened so soon.

Faster rate, eh?

dawman
Posts: 12886
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by dawman » Fri Mar 27, 2009 7:25 pm

You Betcha,

You know the days of pretty jpeg's of ancient mixers and synths is so passé.
Devices like this that hardware cannot do are the future IMHO.
Solaris will be setting the pace in hardware, and bright developers for Scope will do the software........ankyuvarymush... :wink:

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER - 24dB multimode filter panning mod effect 27/03/09

Post by Shroomz~> » Sat Mar 28, 2009 6:56 am

Updated on 28/03/09

- fixed a couple of things that I'd forgotten about & added preset capability.

~Mark

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by Shroomz~> » Sat Mar 28, 2009 7:50 am

If you're one of the few people who downloaded the new version today, please download it again. I uploaded the wrong file earlier.

~Mark

dawman
Posts: 12886
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by dawman » Sat Mar 28, 2009 9:32 am

Ankyu.......

Now it's gone like a " Fart In The Wind. "
I downloaded one that was about 80k larger.......
I'll check back later...........I also need some sleep.... :lol:

User avatar
Mr Arkadin
Posts: 3192
Joined: Thu May 24, 2001 4:00 pm

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by Mr Arkadin » Sat Mar 28, 2009 10:30 am

Shroomz~> wrote:If you're one of the few people who downloaded the new version today, please download it again. I uploaded the wrong file earlier.

~Mark
...er, where's the new file? :D

User avatar
nightscope
Posts: 685
Joined: Tue Aug 21, 2007 4:24 pm
Location: UK

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by nightscope » Sat Mar 28, 2009 11:19 am

Thanks for this whateveritis, Mark. If it makes things go round and round it'll do nicely. Your efforts are appreciated.

ns
“Women and rhythm-section first!”

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by Shroomz~> » Sat Mar 28, 2009 11:28 am

Guys, it's in the first post of the thread. :cool:

ns, well it 'sort of' makes things go round & round, but it wasn't designed as a rotating speaker effect or anything like that. It's not a panner either despite it having a panning sensation. It's simply frequency dependent delay applied to one side's LFO modulation. ... try it out & let me know what you think.

~Mark

igge1
Posts: 45
Joined: Wed Jan 28, 2009 2:27 pm
Location: Malmö

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by igge1 » Sat Mar 28, 2009 12:29 pm

Mmmm, looks good and sounds good. Excelllent. 8)

User avatar
zangsta
Posts: 370
Joined: Thu Sep 20, 2007 10:25 am
Location: Sweden
Contact:

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by zangsta » Sat Mar 28, 2009 2:55 pm

Thanks, Shroomz, another good one ! :D
Useful for this and that...tried it as modulator for guitar.
It will be a useful tool !

Zangsta

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by Shroomz~> » Sat Mar 28, 2009 3:12 pm

Coolness Zangsta! I chucked a few tracks through it for quick demos, but some guitar would be nice! :D

These are just plain Lazy, but you can hear what the effect does pretty well. I think it could have some usefulness here. :D

[The extension mp3 has been deactivated and can no longer be displayed.]

[The extension mp3 has been deactivated and can no longer be displayed.]

[The extension mp3 has been deactivated and can no longer be displayed.]

Last edited by Shroomz~> on Sat Mar 28, 2009 4:28 pm, edited 1 time in total.

User avatar
nightscope
Posts: 685
Joined: Tue Aug 21, 2007 4:24 pm
Location: UK

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by nightscope » Sat Mar 28, 2009 4:12 pm

Shroomz~> wrote:... try it out & let me know what you think.
Just given it a spin.

Excellenté, as Rigsby might have said. I shall lash up the knobs and buttons to the Bitstream forthwith. This thing goes from very subtle to decidedly seasick. Rather useful gizmo. Gracias.

ns
“Women and rhythm-section first!”

User avatar
iSiStOy
Posts: 713
Joined: Mon Jun 20, 2005 4:00 pm

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by iSiStOy » Sun Mar 29, 2009 12:51 am

tantalising.
Many thanks Shroomz!

User avatar
Fluxpod
Posts: 1140
Joined: Tue Oct 03, 2006 4:00 pm
Location: Telefunkenland

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by Fluxpod » Sun Mar 29, 2009 7:46 am

Thanks.Sounds nice.Very usefull device! :)

User avatar
Shroomz~>
Posts: 5669
Joined: Wed Feb 23, 2005 4:00 pm
Location: The Blue Shadows

Re: SPINNER -24dB 4mode filter panning mod FX - updated 28/03/09

Post by Shroomz~> » Sun Mar 29, 2009 9:34 am

I've added a set of 58 Default presets. Download the 'SPINNER_DEF1_presets.zip' file & extract it to your Scope presets folder.

These default presets are only using the LPF. I concentrated on setting up a useful set of modulation frequencies. :wink:
SPINNER_DEF1_presets.JPG
SPINNER_DEF1_presets.JPG (54.99 KiB) Viewed 1911 times
~Mark

Post Reply