String Maching Update/fix Feb18/09

[Jah Servant]

A string synth with a few presets included. Everything should be straight forward.

thanks to Shroomz for the knobz

bless,
Mark

Feb 18/09
so I hadn't used this for a while but I found a problem with the mixer for osc 4

[Brazda lui Novac]

Thanks Mark, I like it's sound, great work again!

[HUROLURA]

Hello Mark,

Just made a few first tests with your device.
It just sounds cool.
I made half a dozen of preset to explore some other way of sounding of your device.
Here they are:

Hurolura S.M. Preset.zip

6 presets to show some other sound potential of this device

(3.69 KiB) Downloaded 266 times

PS:
One remark, though.
It looks like the motion control of the pots is wrong on the control surface. Most of the pot just change value like if they vertical fader though they should be handled rotary ...

[Jah Servant]

thanks for the presets
I have scope set to use all knobs vertically so it's normal for me, however in sdk you can make the knobs work round or vertical, I just put them to vertical, sorry if it's a problem.

[HUROLURA]

Not really a problem for me as I often prefer to program the device using some hardware remote midicontroller (I stacked 2 BCR 2000 unit together with 1 Kawai MM16 and a Novation X-station for that purpose).

I was just surprised by the behaviour which is not the same as for other scope devices.

[Shroomz~>]

The vertical style of pot movement is the most commonly used on Scope devices. That's certainly what sharc & I use all the time just because it's the fastest & most comfortable to work with. I find the rotational style quite cumbersome to work with. All those circular motion mouse movements are quite awkward are they not?

[HUROLURA]

OK guys, if you all feel the vertical mouse motion is the most easy to use.
For me using the mouse is just ... a workaround.

As far as I am concerned, I do prefer real pot/encoder !!!
So I do not use the mouse that often and I prefer to map some of my favourite MIDI controller on the plugs.

CheerZ

[Jah Servant]

I definately find the vertical movement is easier, I use that to get close then I fine tune with the page up/down buttons on the computer keyboard, I use those alot

[HUROLURA]

OK, OK, I surrender ...

[Jah Servant]

fixed a problem with the mixer for osc 4, BUMP

[dawman]

Ladies & Gentlemen.......Jah Servant..........Man Or Myth......ankyu.
I made a couple of presets and an mpeg.
I thought I'd demo your M2S + The String Maching.......

[Neutron]

Dont forget to try this with the warp factor 18

[dawman]

Why Yi Youghta...............

Silly Rabbit..............nyuk, nyuk.............What do think I was using?