MOVEQ+ FREE V1.3b ---CORRECTED---; last edit 03.11.07
-
- Posts: 652
- Joined: Tue Dec 09, 2003 4:00 pm
- Location: Home By The Sea
Careful with that axe, Eugene
I have a question about the Stereo-Split Mode. From what I understand (I'm not absolutely sure), this mode changes the channels from
1L 1R 2L 2R 3L 3R 4L 4R
to
1L 2L 3L 4L 1R 2R 3R 4R
It just reassigns where the Left / Rights are, or did I miss something?
1L 1R 2L 2R 3L 3R 4L 4R
to
1L 2L 3L 4L 1R 2R 3R 4R
It just reassigns where the Left / Rights are, or did I miss something?
-
- Posts: 652
- Joined: Tue Dec 09, 2003 4:00 pm
- Location: Home By The Sea
-
- Posts: 59
- Joined: Sun Mar 18, 2007 9:59 am
- Location: Rastatt/ Germany
MOVEQ+CUT
Version 1.2 still had no success on the broadcasting software "Cutmaster". It simply refused to load. With MOVeq+cut this will change. I had the chance to test MOVEQ+ on Cutmaster and sort out the problem.
MOVEQ+cut was the result and has another advantage: It's got rid of the monitoring-section which added DSP consumption. If anybody really needs the monitoring-section & works with cutmaster drop me a line and there will be an alternative Cutmaster version with monitoring (which would cost me another 45min. of work). For now I think this is a nice addition for all SFP-users too.
have fun!
Martin
MOVEQ+cut was the result and has another advantage: It's got rid of the monitoring-section which added DSP consumption. If anybody really needs the monitoring-section & works with cutmaster drop me a line and there will be an alternative Cutmaster version with monitoring (which would cost me another 45min. of work). For now I think this is a nice addition for all SFP-users too.
have fun!
Martin
- Attachments
-
- MOVEQcut.zip
- (2.43 MiB) Downloaded 369 times
-
- Posts: 59
- Joined: Sun Mar 18, 2007 9:59 am
- Location: Rastatt/ Germany
Sorry, no idea
Cutmaster seems to use a lot of independend stuff from sfp and the other way round some things are simply missing. The script I used seems to be not part of CM. I wonder, why it worked on the system, where I tested it ... but it will last some time till I get the chance to test it again.
sorry. At least it seems to 'work', does it?
Martin
Cutmaster seems to use a lot of independend stuff from sfp and the other way round some things are simply missing. The script I used seems to be not part of CM. I wonder, why it worked on the system, where I tested it ... but it will last some time till I get the chance to test it again.
sorry. At least it seems to 'work', does it?
Martin
Re: MOVEQ+ FREE V1.3; last edit 02.11.07
This must be the most heavily downloaded device ever for SFP. Congratulations & thanks again for the updates !!MCCY wrote:Thanks for downloading MOVEQ+ so many times!!!!
-
- Posts: 1739
- Joined: Wed May 15, 2002 4:00 pm
- Contact:
I ask that myself... some weeks ago. Could someone repost it, please - I've put it somewhere... put where???? It's a pity, that I do not need my manual
B.t.w. ... as it's already on top now... has anybody heard about rumours of a version II ? Now after MCCY talked to Mr. Piehl, he could maybe build a little faster version Just a thought.
B.t.w. ... as it's already on top now... has anybody heard about rumours of a version II ? Now after MCCY talked to Mr. Piehl, he could maybe build a little faster version Just a thought.
- Mr Arkadin
- Posts: 3280
- Joined: Thu May 24, 2001 4:00 pm