LE-1 Loudness Enhancer (final version updated)
LE-1 Loudness Enhancer (final version updated)
LE-1 is a Loudness Enhancer.
I've built this for my own needs, but if U find it useful, take it for free
It's not formally a classic compressor and not a classic EQ, it's a "signal fattener" with "eq" controls for high and low band plus a tube warmer.
I've built it for invigorate my "poor & constipated" native soft synthesizers (FM7, and some freeware). It's calibrated in my own taste.
Try it also with standard Creamware synths like Uknow, Saturn or Miniscope, or try with voice recording and (with carefulness) with some poor MP3 songs (warning, maximized mix and/or higher pot levels can reach some unwanted distortion).
If U find some bugs and if U have some opinion, please let me know
Enjoy =)
Dropout - www.cactusound.com
sound(at)cactusound.com
[edit] MP3 demos added, all settings are at lowest FX influence (knobs at 0 dB) so if U want more Loudness U have to add more gain!!! Original sound fist, effected sound last [/edit]
[edit] open bug fixed [/edit]
I've built this for my own needs, but if U find it useful, take it for free
It's not formally a classic compressor and not a classic EQ, it's a "signal fattener" with "eq" controls for high and low band plus a tube warmer.
I've built it for invigorate my "poor & constipated" native soft synthesizers (FM7, and some freeware). It's calibrated in my own taste.
Try it also with standard Creamware synths like Uknow, Saturn or Miniscope, or try with voice recording and (with carefulness) with some poor MP3 songs (warning, maximized mix and/or higher pot levels can reach some unwanted distortion).
If U find some bugs and if U have some opinion, please let me know
Enjoy =)
Dropout - www.cactusound.com
sound(at)cactusound.com
[edit] MP3 demos added, all settings are at lowest FX influence (knobs at 0 dB) so if U want more Loudness U have to add more gain!!! Original sound fist, effected sound last [/edit]
[edit] open bug fixed [/edit]
- Attachments
-
- LE-1 final.zip
- (947.65 KiB) Downloaded 1963 times
-
[The extension mp3 has been deactivated and can no longer be displayed.]
-
- le-1.jpg (19.65 KiB) Viewed 13580 times
Last edited by erminardi on Sun Dec 17, 2006 9:31 am, edited 5 times in total.
4PC + Scope 5.0 + no more Xite + 2xScope Pro + 6xPulsarII + 2xLunaII + SDK + a lot of devices (Flexor III & Solaris 4.1 etc.) + Plugiator.
-
- Posts: 311
- Joined: Fri Nov 08, 2002 4:00 pm
- Location: Land of Polarbears
- Contact:
Damn, it's true... now I'm very busy, but next week, maybe, I can try to correct this bug.
Thanks for the patience in this beta testing
Anyway the sound IMO @ is ok, I need to rework on the dev finalization...
SeeU
Thanks for the patience in this beta testing
Anyway the sound IMO @ is ok, I need to rework on the dev finalization...
SeeU
4PC + Scope 5.0 + no more Xite + 2xScope Pro + 6xPulsarII + 2xLunaII + SDK + a lot of devices (Flexor III & Solaris 4.1 etc.) + Plugiator.
-
- Posts: 311
- Joined: Fri Nov 08, 2002 4:00 pm
- Location: Land of Polarbears
- Contact:
Re: LE-1 Loudness Enhancer (beta)
hey, you've stolen a circuit design idea from me and copied LochNesserminardi wrote:LE-1 is a beta prototype of Loudness Enhancer.
nice logo, btw.
-
- Posts: 311
- Joined: Fri Nov 08, 2002 4:00 pm
- Location: Land of Polarbears
- Contact:
Yes, I know... I don't know how fix this but this version seems to be stable compared to beta.voidar wrote:I get a "The preset-file doesn't correspond to this device"-error while loading it up.
Do you really need presets for a 2 knobs device?
In future i will fix it... when I understand SDK better.
4PC + Scope 5.0 + no more Xite + 2xScope Pro + 6xPulsarII + 2xLunaII + SDK + a lot of devices (Flexor III & Solaris 4.1 etc.) + Plugiator.
Eminardi,
you have probably made a preset parameter list outside the parent device, you need to find it and delete it to fix the error message when opening the device.
The cause why the presets are not working is because in the preset parameters list you have added just the "show" value, but you should drag all the pot values from the parameters list to the preset parameters window and to do it right:
1 select the device in the project window
2 freeze the parameters window
3 freeze the preset parameters window
4 drag all pot values as i've said above
you have probably made a preset parameter list outside the parent device, you need to find it and delete it to fix the error message when opening the device.
The cause why the presets are not working is because in the preset parameters list you have added just the "show" value, but you should drag all the pot values from the parameters list to the preset parameters window and to do it right:
1 select the device in the project window
2 freeze the parameters window
3 freeze the preset parameters window
4 drag all pot values as i've said above