PlanetZ forums - scopeusers.com

Scope 7 related software downloads:

http://scope.zone/index.php?id=1978&lg= ... blic/scope

Here are the Downloads:
SCOPE V7: http://scope.zone/index.php?id=1978&lg= ... scope_v7.0

SDK V7: http://scope.zone/index.php?id=1978&lg= ... e_sdk_v7.0

purchased here as well. with the madness of SDK. hope to use it just a little bit!

Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

This is not yet available, but a teaser if you own the prodyssey it has a v7 coming soon too, more quirky mods on this one.

- unison
- 3 additional filter types - minimax, pro1, pro5 (+ the original prodyssey)
- mild distortion
- second filter now switchable between hp/lp
- drone mode
- 4 fx slots

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

you can rename the 5.1 folder so its not called scope pci (rename it to something like scope5)

faxinadu wrote:

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

you can rename the 5.1 folder so its not called scope pci (rename it to something like scope5)

Noted thanks!

catscratch wrote:

don't know about that particular one

It's well documented on here so can't see why it wouldn't be included... been a thorn in my side for years now.

well, this site is not SonicCore.
feel free to let Holger know.

there is only so much that a person can do at a time. the biggest hurdle is overcome. it'sd not your problem, but Scope 6 almost ruined everything. it was abandoned and everything was left in a big mess when the main programmer ran into a brick wallk and quit. it has taken all this time to get back to order.

as i have said before, i use ccs in the Scope mixers all the time and my settings get saved with the project reliably. unfortunately, the thing you are trying to do SHOULD work , but doesn't. still, you are the only one who has consistently complained, and only here and on XITEd. please write Holger and explain the exact actions that do not work. if he can fix it, he will.

faxinadu wrote:

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

you can rename the 5.1 folder so its not called scope pci (rename it to something like scope5)

Scope 7 can install into the v5.1 folder. it will overwrite the system files, but it will leave the personal user data.
of course, you should back up your Scope folder for safety's sake.

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.

petal wrote:

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.

guys it was mentioned above - YOU CAN NOT USE BOTH. once you install 7 driver, 5.1 won't work.

petal wrote:

faxinadu wrote:
i'm not sure about the answers to those, i can try to find out. note: info i give here is my own, not official sonic core info or position.

I'd appreciate that. If I can't run both my PCI installation and my XITE installation simultaneously, I'll have to rethink my whole setup.

that should not change with Scope 7. you can run PCI and XITE like always, afaik.

petal wrote:

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.

that's right, unless you manually choose to use the older driver.

petal wrote:

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.

Just change the driver manually (reinstalling the pevious driver).

garyb wrote:

catscratch wrote:

don't know about that particular one

It's well documented on here so can't see why it wouldn't be included... been a thorn in my side for years now.

as i have said before, i use ccs in the Scope mixers all the time and my settings get saved with the project reliably. unfortunately, the thing you are trying to do SHOULD work , but doesn't. still, you are the only one who has consistently complained, and only here and on XITEd. please write Holger and explain the exact actions that do not work. if he can fix it, he will.

I'm not sure what exactly catscratch is trying to do, but there is a problem/bug in the cc system on Scope, and as Atom informed me after many hours of trying to figure out what was going on, there has been a bug here for many many years. It's a very old and known bug from back in the creamware days:

http://forums.scopeusers.com/viewtopic. ... lit=cc+bug

garyb wrote: that should not change with Scope 7. you can run PCI and XITE like always, afaik.

Great to hear - thanks!

garyb wrote:

petal wrote:

krizrox wrote:Thanks for the download links guys! Appreciated. I'm on it!

As far as installation is concerned, does V5.1 have to be removed before I can install V7? I think the answer is yes but I just wanted to confirm. Thanks!

I installed the V7 driver and my v5.1 installation stopped working. Not sure I'f I can easily go back again.

that's right, unless you manually choose to use the older driver.

OK - great!

Are samplers working in 64bit.
Looks like a few seq issues are sorted with mention to sb404 and modular module seq1 (for Xite)

I saw Faxi say earlier in this thread: "sts doesn't work yet in 64bit, but other samples including some of the free 3rd party ones work."

I hope the "yet" bit is meant in an optimistic tone

Anyways, great seeing a new release

JoPo wrote:I just send the news to french Audiofanzine to ask them to publish a news in their newsletter because I hope they don't have time to do that at S|C ! But I also told them that even if "soon", at S|C, can mean "years or decade", this time, they are using the same "soon" meaning !

If all "Z" users would ask to his favorit audio stuff media or forum to spread the good word to the world ! That would be nice !

cool