error messages

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
tjsound
Posts: 100
Joined: Wed Sep 30, 2009 7:19 am
Location: moscow russia

error messages

Post by tjsound »

I don’t know if it makes sense to write in support, I’ll just leave it here. Loading any project causes a series of error messages.
If you are lucky, the scope starts working after the fifth or sixth restart of the computer, but sometimes the same can happen at any time.
XITE-1 scope v7.0.1706, windows 7
Attachments
5
5
5.PNG (8.42 KiB) Viewed 3550 times
4
4
4.PNG (11.94 KiB) Viewed 3550 times
3
3
3.PNG (6.71 KiB) Viewed 3550 times
2
2
2.PNG (12.33 KiB) Viewed 3550 times
first
first
1.PNG (7.75 KiB) Viewed 3550 times
XITE-1, Reaperx64...
tjsound
Posts: 100
Joined: Wed Sep 30, 2009 7:19 am
Location: moscow russia

Re: error messages

Post by tjsound »

more
Attachments
8.PNG
8.PNG (16.01 KiB) Viewed 3548 times
7.PNG
7.PNG (5.86 KiB) Viewed 3548 times
6.PNG
6.PNG (3.85 KiB) Viewed 3548 times
XITE-1, Reaperx64...
petal
Posts: 2354
Joined: Sun Sep 15, 2002 4:00 pm
Location: Copenhagen
Contact:

Re: error messages

Post by petal »

Looks like a connect fail between the pc and XITE - Try this first:

1. Take out the cable in both ends and reseat the cable. If this doesn't work, try another cable.
2. If the above doesn't help, try to reseat the pci-card in the pc.

If none of the above works, write here again :)
tjsound
Posts: 100
Joined: Wed Sep 30, 2009 7:19 am
Location: moscow russia

Re: error messages

Post by tjsound »

No, cable and card manipulations don't help. - The start up project works well, errors occur if I load another project.
XITE-1, Reaperx64...
petal
Posts: 2354
Joined: Sun Sep 15, 2002 4:00 pm
Location: Copenhagen
Contact:

Re: error messages

Post by petal »

OK - Sounds like the project that you are trying to load is corrupted somehow. To my knowledge I'm afraid there is no solution for that.
tjsound
Posts: 100
Joined: Wed Sep 30, 2009 7:19 am
Location: moscow russia

Re: error messages

Post by tjsound »

the project is nothing big and third-party plugins. as soon as i launch reaper the errors begin
Attachments
pro.PNG
pro.PNG (44.02 KiB) Viewed 3529 times
XITE-1, Reaperx64...
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: error messages

Post by garyb »

looks like a hardware issue...
tjsound
Posts: 100
Joined: Wed Sep 30, 2009 7:19 am
Location: moscow russia

Re: error messages

Post by tjsound »

Looks like it's time to change capacitors on the board. :)
XITE-1, Reaperx64...
User avatar
valis
Posts: 7306
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: error messages

Post by valis »

I would have an experienced tech give it a look, or send it in for servicing. Lots of things can fail there besides just caps.
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: error messages

Post by garyb »

an XITE-1 should probably go to SonicCore, if you need service.
Post Reply