Win 10 issue

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Mightychub
Posts: 19
Joined: Wed Dec 06, 2017 3:43 pm

Re: Win 10 issue

Post by Mightychub » Mon Jul 16, 2018 4:42 am

OK guys think I have resolved my issue. After going back through the bios and this was not one of those things that jumps out and says it's wrong or right. There was a thing called AiTweek? it was set to auto I disabled it and so for the latency checker is the lowest I have seen my system run since building it.
I recorded a drummer on Sat and no data drops at all so looks like it is well and truly sorted.
Thanks for all your input it means a lot. Pulsar Scope has still got an amazing after support and a lot of folk still using this amazing tech. I love mine to bits and it's hard to let go of it.

Matti
Posts: 28
Joined: Wed Jul 11, 2007 7:11 am
Contact:

Re: Win 10 issue

Post by Matti » Wed Aug 01, 2018 12:36 am

Hi, I have same problems. Whe´re I found the thing called AiTweek? I´m working earlier SCOPE 5.1 with XP-computer and anykind problems like this not happend. Now I have new win10 maschine DELL Precision T3610 -Xeon E5 (Chipset Intel C602)-1620v2/24/128GSSD+1TBHDD/Q4000/W10 and Scope v7 and this problems happend by the recordings.

fidox
Posts: 639
Joined: Sun Aug 17, 2003 4:00 pm
Location: Slovenia
Contact:

Re: Win 10 issue

Post by fidox » Wed Aug 01, 2018 1:37 am

sometimes it's very tricky to found the problem. It could be a small thing in bios, windows, drivers, hardware, anything, so yes,
trying and trying and reading and trying

Post Reply