help with multi pc/interface setup

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
judiefre1
Posts: 52
Joined: Sun Mar 18, 2007 3:35 pm

help with multi pc/interface setup

Post by judiefre1 »

hey i have a new laptop im using as my main daw pc with rme usb interface and an old desktop computer with scope pci card. I built this setup in hopes of using the scope pc as external system for just synths and fx via adat. No problem except one thing i didnt consider enough-midi. Is there any way to send midi from daw sequencer on laptop into scope pc to control scope synths?

or is only way to be able to utilize midi between sequencer and scope one needs to have scope in daw system?
User avatar
sunmachine
Posts: 471
Joined: Mon Mar 01, 2010 12:37 am

Re: help with multi pc/interface setup

Post by sunmachine »

If the RME interface has built-in MIDI ports you could use these.
If not you could send MIDI over ethernet via CopperLan for example.
You can download it here: http://copperlan.org/index.php/download
judiefre1
Posts: 52
Joined: Sun Mar 18, 2007 3:35 pm

Re: help with multi pc/interface setup

Post by judiefre1 »

sunmachine wrote: Fri Jan 05, 2018 9:18 am If the RME interface has built-in MIDI ports you could use these.
If not you could send MIDI over ethernet via CopperLan for example.
You can download it here: http://copperlan.org/index.php/download
yes! stupid me lol connect the midi out of rme interface into midi in of scope.. working great, thanks! :D
User avatar
sunmachine
Posts: 471
Joined: Mon Mar 01, 2010 12:37 am

Re: help with multi pc/interface setup

Post by sunmachine »

Great that you're back to business! That was easy :)
Post Reply