Scope 7 errors xite 1D win 7 x 64

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
Ambient Source
Posts: 88
Joined: Thu Nov 29, 2012 7:12 am
Contact:

Scope 7 errors xite 1D win 7 x 64

Post by Ambient Source »

Hi I installed scope 7 this morning and all is good, apart from this annoying error message when I launch scope

''timeout waiting for acknowledge from dsp 6 (communication not stalled)

this didn't happen with 5.1 , if I click ok then scope loads as normal,

if I add a new device or open the settings, I get the error 'your computer is too slow.aborted'
and if I click ok the synth loads as normal

also got a blue screen of death when testing solaris sample oscillators, so I assume no fix yet .

any idea how I fix this?
Attachments
error.JPG
error.JPG (17.56 KiB) Viewed 5408 times
Last edited by Ambient Source on Mon Dec 11, 2017 2:16 am, edited 1 time in total.
Ambient Source
Posts: 88
Joined: Thu Nov 29, 2012 7:12 am
Contact:

Re: SOLVED ! Scope 7 errors xite 1D win 7 x 64

Post by Ambient Source »

The problem was rectified by reinstalling scope 7
User avatar
dante
Posts: 5043
Joined: Sat Nov 24, 2001 4:00 pm
Location: Melbourne Australia
Contact:

Re: SOLVED ! Scope 7 errors xite 1D win 7 x 64

Post by dante »

I solved it by installing Scope 7 over the old Scope 5.1. Before that I was installing Scope 7 on a fresh partition (with no older Scope) and wasnt able to get rid of that error even after multiple install / reboots.

Is your install Scope 7 afresh, or is it an update to a previous Scope 5.1 ?
Ambient Source
Posts: 88
Joined: Thu Nov 29, 2012 7:12 am
Contact:

Re: SOLVED ! Scope 7 errors xite 1D win 7 x 64

Post by Ambient Source »

over 5.1
User avatar
dante
Posts: 5043
Joined: Sat Nov 24, 2001 4:00 pm
Location: Melbourne Australia
Contact:

Re: SOLVED ! Scope 7 errors xite 1D win 7 x 64

Post by dante »

Suspected as much. Have you done a Scope 7 install fresh & got the error ?

What I'm trying to do is establish a pattern for a bug report - eg whether XITE-1D Scope 7 fresh install gets a DSP 6 error across more than 1 user's machine.
Ambient Source
Posts: 88
Joined: Thu Nov 29, 2012 7:12 am
Contact:

Re: SOLVED ! Scope 7 errors xite 1D win 7 x 64

Post by Ambient Source »

Hi Dante,
I spoke too soon, the Error came back on booting today, So I tried a clean install and got the same error.
Error happens on both clean install and install over 5.1
Windows 7 x64 SP1
32 gb ram
Xite1D
Scope 7 x64
User avatar
dante
Posts: 5043
Joined: Sat Nov 24, 2001 4:00 pm
Location: Melbourne Australia
Contact:

Re: Scope 7 errors xite 1D win 7 x 64

Post by dante »

Damn. Mine only comes up on clean install, not over-old install. But I'm on Win8 and Win10 so slightly different from your system.

Whatever, it does seem XITE-1D specific whether clean install or not.

You could try the old XITE-1D hotfix (haven't tried this so don't know if it works) http://scope.zone/index.php?id=1978&lg= ... scope_xite
w_ellis
Posts: 554
Joined: Wed Nov 07, 2001 4:00 pm
Location: London, U.K.

Re: Scope 7 errors xite 1D win 7 x 64

Post by w_ellis »

Definitely not xite 1D specific. Having the same problem with my xite 1 after installing Scope 7 over the top of a Scope 5.1 install on Windows 8 32bit. It worked straight after the first install, I then installed the SDK, which also worked and then went back to Scope and getting the error messages. Will keep investigating.
User avatar
dante
Posts: 5043
Joined: Sat Nov 24, 2001 4:00 pm
Location: Melbourne Australia
Contact:

Re: Scope 7 errors xite 1D win 7 x 64

Post by dante »

Great thanks Will - I wont bother mucking with the XITE-1D hotfix then :)
w_ellis
Posts: 554
Joined: Wed Nov 07, 2001 4:00 pm
Location: London, U.K.

Re: Scope 7 errors xite 1D win 7 x 64

Post by w_ellis »

Problem persisted after removing driver (and then again, as the 5.1 driver took over). Did a few reboots, which didn't help. Eventually power cycled the Xite-1 and at last it's working again. Makes me a bit nervous, I have to say. Will report back if it recurs.
User avatar
garyb
Moderator
Posts: 23244
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Scope 7 errors xite 1D win 7 x 64

Post by garyb »

don't install the driver twice. both v7 and sdk7 install the driver...
User avatar
dante
Posts: 5043
Joined: Sat Nov 24, 2001 4:00 pm
Location: Melbourne Australia
Contact:

Re: Scope 7 errors xite 1D win 7 x 64

Post by dante »

Will, on the XITE-1D the message refers to DSP #6. Is that the same on the XITE-1 ?
guppy
Posts: 388
Joined: Thu Aug 16, 2012 6:42 pm

Re: Scope 7 errors xite 1D win 7 x 64

Post by guppy »

I got the same with my xite1 last month. Try to investigate on the power supply side.
w_ellis
Posts: 554
Joined: Wed Nov 07, 2001 4:00 pm
Location: London, U.K.

Re: Scope 7 errors xite 1D win 7 x 64

Post by w_ellis »

dante wrote: Wed Dec 13, 2017 4:21 pm Will, on the XITE-1D the message refers to DSP #6. Is that the same on the XITE-1 ?
My error message was exactly the same as yours
w_ellis
Posts: 554
Joined: Wed Nov 07, 2001 4:00 pm
Location: London, U.K.

Re: Scope 7 errors xite 1D win 7 x 64

Post by w_ellis »

guppy wrote: Tue Dec 19, 2017 4:33 am I got the same with my xite1 last month. Try to investigate on the power supply side.
I had a different issue with the Xite-1 not being seen on a 5.1 install (Win 7 64bit) the other day, which was also resolved by power cycling the Xite-1 (+ reboot). I wonder whether we're just seeing a different symptom for the same issue on Scope 7.
Ambient Source
Posts: 88
Joined: Thu Nov 29, 2012 7:12 am
Contact:

Re: Scope 7 errors xite 1D win 7 x 64

Post by Ambient Source »

w_ellis wrote: Tue Dec 19, 2017 4:46 am
guppy wrote: Tue Dec 19, 2017 4:33 am I got the same with my xite1 last month. Try to investigate on the power supply side.
I had a different issue with the Xite-1 not being seen on a 5.1 install (Win 7 64bit) the other day, which was also resolved by power cycling the Xite-1 (+ reboot). I wonder whether we're just seeing a different symptom for the same issue on Scope 7.
I don't think so, My xite 1D worked fine with 5.1, the same day I installed 7.0 and got the error message,
so I uninstalled 7.0 an put 5.1 back...and no error message, i reinstalled 7.0 and error returns
User avatar
Tau
Posts: 793
Joined: Mon Jun 26, 2006 4:00 pm
Location: Portugal
Contact:

Re: Scope 7 errors xite 1D win 7 x 64

Post by Tau »

I also get that error message on the XITE-1, but for DSP 7.

I have other issues with the unit since Scope 5, which appear to be hardware related, so I can't really expect normal operation. I thought it also had to do with the hardware. But this message only appeared after installing Scope 7, and, if others seem to have it as well, it could be related to the software.
Post Reply