Hi
After Installing a fresh windows 10 installation on an SSD, the booting is now much faster than normal HHD, but scope hardware is not seen at first boot.
Looks like I have to wait more than 10, 20 seconds to launch scope.exe.
If I launch Scope.exe with windows startup.. I get error.... "No Scope hardware"
Any Ideas on this?
Scope hardware is not recognized on Windows Startup
Re: Scope hardware is not recognized on Windows Startup
Contact problems
out and about for music production. Are you still configguring your Studio music first!
Re: Scope hardware is not recognized on Windows Startup
PCI board contacts?
Re: Scope hardware is not recognized on Windows Startup
Do not let Scope auto start when ŵindows starts. Disable that and start manually.
I had the same issue before when first setting up Scope 7 64bit on Win 7 64bit on an SSD drive.
My guess is windows needs to complete loading drivers and other processes so then when you start Scope manually shortly after it should work fine.
Hope that helps
I had the same issue before when first setting up Scope 7 64bit on Win 7 64bit on an SSD drive.
My guess is windows needs to complete loading drivers and other processes so then when you start Scope manually shortly after it should work fine.
Hope that helps
Re: Scope hardware is not recognized on Windows Startup
Have you installed the latest chipset driver for your mainboard?
Clean the pci contacts with a Rubber! Nothing else.
Clean the pci contacts with a Rubber! Nothing else.
out and about for music production. Are you still configguring your Studio music first!
Re: Scope hardware is not recognized on Windows Startup
yes, don't autostart.
Re: Scope hardware is not recognized on Windows Startup
Might as well clean the contacts too =]