Unfortunately I was right with my distrust. Today again BSOD and there was definitely no change on the system since the last time XTC was running well. I assume now that there might be a hardware issue with one of my Pulsar boards. I will try to identify the board that makes trouble by removing them one by one. Most probably its the one that carries all my licenses
.
BSOD in XTC mode
Re: BSOD in XTC mode
sure, you can use the XTC forum for that.
Re: BSOD in XTC mode
Last development: I changed the sample rate setting in Cubase from 24 bit to 16 bit and for the moment the XTC-plug ins again started to work. Nevertheless, I will Need somemore time to see wether the System will now be stable for a longer term. ... to be continued ( or hopefully not).
Re: BSOD in XTC mode
... and it happened again. In the meantime I assume ist a codec failure from some unwanted background installation. Good that I made severL Bxkups, bad that myhomeserver fails. Thanks to Murphy.
Re: BSOD in XTC mode
... and it happened again. In the meantime I assume ist a codec failure from some unwanted background installation. Good that I made severL Bxkups, bad that myhomeserver fails. Thanks to Murphy.
Re: BSOD in XTC mode
Checked out everything a hundred times and the assumed codec issue was a problem with itunes that was uncorrectly deinstalled. This problem is correctsd.
Nevertheless, sometimes the XTC Modus still crashes and sometimes not. It seems, that if XTC-mode runs on a day, than I can switch the System off and on several times and the behaviour on that day stays either stable or crashy. Next day things might look different again. I have no more idea exept that it is a weird hardware problem.
I would try changing some of my cards but the key for Scope 5 is only registered on one Card, which according to Murphy will be the faulty one (if so).
Nevertheless, sometimes the XTC Modus still crashes and sometimes not. It seems, that if XTC-mode runs on a day, than I can switch the System off and on several times and the behaviour on that day stays either stable or crashy. Next day things might look different again. I have no more idea exept that it is a weird hardware problem.
I would try changing some of my cards but the key for Scope 5 is only registered on one Card, which according to Murphy will be the faulty one (if so).