BSOD in XTC mode

An area for people to discuss Scope related problems, issues, etc.

Moderator: valis

Wolferich
Posts: 60
Joined: Mon Dec 20, 2004 4:00 pm
Contact:

Re: BSOD in XTC mode

Post by Wolferich » Mon Nov 28, 2016 9:26 am

Unfortunately I was right with my distrust. Today again BSOD and there was definitely no change on the system since the last time XTC was running well. I assume now that there might be a hardware issue with one of my Pulsar boards. I will try to identify the board that makes trouble by removing them one by one. Most probably its the one that carries all my licenses :-(
.

User avatar
garyb
Posts: 21201
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: BSOD in XTC mode

Post by garyb » Mon Nov 28, 2016 9:58 am

sure, you can use the XTC forum for that.

Wolferich
Posts: 60
Joined: Mon Dec 20, 2004 4:00 pm
Contact:

Re: BSOD in XTC mode

Post by Wolferich » Sat Dec 03, 2016 9:56 am

Last development: I changed the sample rate setting in Cubase from 24 bit to 16 bit and for the moment the XTC-plug ins again started to work. Nevertheless, I will Need somemore time to see wether the System will now be stable for a longer term. ... to be continued ( or hopefully not).

Wolferich
Posts: 60
Joined: Mon Dec 20, 2004 4:00 pm
Contact:

Re: BSOD in XTC mode

Post by Wolferich » Sun Dec 04, 2016 9:25 am

... and it happened again. In the meantime I assume ist a codec failure from some unwanted background installation. Good that I made severL Bxkups, bad that myhomeserver fails. Thanks to Murphy.

Wolferich
Posts: 60
Joined: Mon Dec 20, 2004 4:00 pm
Contact:

Re: BSOD in XTC mode

Post by Wolferich » Sun Dec 04, 2016 9:25 am

... and it happened again. In the meantime I assume ist a codec failure from some unwanted background installation. Good that I made severL Bxkups, bad that myhomeserver fails. Thanks to Murphy.

Wolferich
Posts: 60
Joined: Mon Dec 20, 2004 4:00 pm
Contact:

Re: BSOD in XTC mode

Post by Wolferich » Thu Dec 15, 2016 12:27 pm

Checked out everything a hundred times and the assumed codec issue was a problem with itunes that was uncorrectly deinstalled. This problem is correctsd.

Nevertheless, sometimes the XTC Modus still crashes and sometimes not. It seems, that if XTC-mode runs on a day, than I can switch the System off and on several times and the behaviour on that day stays either stable or crashy. Next day things might look different again. I have no more idea exept that it is a weird hardware problem.

I would try changing some of my cards but the key for Scope 5 is only registered on one Card, which according to Murphy will be the faulty one (if so).

Post Reply