Reaper 3.74/64 and ASIO Scope (v5.1 - PCI) error [SOLVED]
Reaper 3.74/64 and ASIO Scope (v5.1 - PCI) error [SOLVED]
I'm checking out Reaper and Scope 5.1 PCI on Vista x64.
I get an error loading ASIO driver
I get an error loading ASIO driver
Last edited by Cochise on Tue Jan 04, 2011 4:01 pm, edited 2 times in total.
Re: Reaper 3.74/64 and ASIO Scope
reaper 32 or 64 ?
i use reaper 32 in win7 64 with scope 5.1 x64
no problems
i use reaper 32 in win7 64 with scope 5.1 x64
no problems
lg widy
Re: Reaper 3.74/64 and ASIO Scope
Reaper x64...
- the19thbear
- Posts: 1406
- Joined: Thu Feb 20, 2003 4:00 pm
- Location: Denmark
- Contact:
Re: Reaper 3.74/64 and ASIO Scope
What is the error? And please post a picture p
Of your scope project
Of your scope project
Re: Reaper 3.74/64 and ASIO Scope
I've tried Reaper 32 in Vista 64 with Scope 5.1 x64...widy wrote:reaper 32 or 64 ?
i use reaper 32 in win7 64 with scope 5.1 x64
no problems
...ASIO scope PCI isn't even showed in the audio device settings.
Re: Reaper 3.74/64 and ASIO Scope
maybe start both scope + reaper in admin mode
this was necessary in win7
this was necessary in win7
lg widy
Re: Reaper 3.74/64 and ASIO Scope
Unluckily this doesn't work. Scope and Reaper were installed using admin rights. No Asio even running them as admin.
Re: Reaper 3.74/64 and ASIO Scope
What happens if you enable that"Ignore asio reset messages" feature?And maybe after that try projekts can override device sample rate dialog.
Re: Reaper 3.74/64 and ASIO Scope
No way, till now; in/out channels are not seen... and it's a pity, since Scope and modules look loading smoother and faster in 64 bit environment.
I'm checking the 32 bit version on the same machine, different partition booting Xp x86... no problem till now.
I'm checking the 32 bit version on the same machine, different partition booting Xp x86... no problem till now.
Re: Reaper 3.74/64 and ASIO Scope
reaper definitely works with Scope in 64bit....Jimmy's been using it.
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
I forgot to state I'm using PCI version, not Xite (I've just edited the thread title and the first post) .
Looks like there's other people running 5.1 x64 PCI with Reaper...
No Win7 here, though; I'm using Vista...
I can't even check if troubles are related to Reaper, or Vista (or the combination of the two), since I can't install any ASIO host other than Reaper in x64 OS.
Reaper is working with other drivers, though..
Looks like there's other people running 5.1 x64 PCI with Reaper...
No Win7 here, though; I'm using Vista...
I can't even check if troubles are related to Reaper, or Vista (or the combination of the two), since I can't install any ASIO host other than Reaper in x64 OS.
Reaper is working with other drivers, though..
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
Did you install the ReaRoute ASIO driver?
I did that once by mistake, and it trashed my SFP setup. I had the same issues with Scope ASIO as you describe.
Only way I managed to get rid of them was by reinstalling win xp from scratch
I did that once by mistake, and it trashed my SFP setup. I had the same issues with Scope ASIO as you describe.
Only way I managed to get rid of them was by reinstalling win xp from scratch
- next to nothing
- Posts: 2521
- Joined: Mon Jul 29, 2002 4:00 pm
- Location: Bergen, Norway
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
Just did the standard Reaper install on a win 7 64bit OS, Scope PCI, no problems. ReaRoute not installed (it is not installed by default).
A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort.
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
I'm using win 7 64 and Scope 5.1 and it works fine here.
I maybe read this too fast before I pressed answer.
Try to connect the cabels from the mixer (mix L and R out) to asio destination.
I maybe read this too fast before I pressed answer.
Try to connect the cabels from the mixer (mix L and R out) to asio destination.
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
From any of you guys having similar configuration working, maybe it could be useful for me to know what's showed as content in the following registry keys:
HKEY_LOCAL_MACHINE\SOFTWARE\ASIO\ASIO SCOPE PCI
and
HKEY_CLASSES_ROOT\CLSID\{DD320B40-17F0-11D2-9CAD-006097A97422}
HKEY_LOCAL_MACHINE\SOFTWARE\ASIO\ASIO SCOPE PCI
and
HKEY_CLASSES_ROOT\CLSID\{DD320B40-17F0-11D2-9CAD-006097A97422}
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
Cochise wrote:From any of you guys having similar configuration working, maybe it could be useful for me to know what's showed as content in the following registry keys:
HKEY_LOCAL_MACHINE\SOFTWARE\ASIO\ASIO SCOPE PCI
and
HKEY_CLASSES_ROOT\CLSID\{DD320B40-17F0-11D2-9CAD-006097A97422}
- Attachments
-
- Unbenannt2.png (55.32 KiB) Viewed 4957 times
-
- Unbenannt.png (45.2 KiB) Viewed 4957 times
lg widy
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
Thx Widy.
Mine is looking this way Should I change it?
Mine is looking this way Should I change it?
Re: Reaper 3.74/64 and ASIO Scope (v5.1 - PCI)
Changed.... WOW! looks like working now!