PlanetZ forums - scopeusers.com

This sounds like the same problem I described about a month ago in the thread on the stm24/48. I never completely resolved the problem. I was running 3 pulsar cards, all pulsar I(4 dsp cards). I would get input channels, or aux outs that would act muted. When I tried changing the channels to board a...

What does phase comp have to do with it. I only started trying to assign the inputs because I was having troubles. Certain combinations would indicate I did not have enough dsp so I assumed I was on the right track. It seem odd I can run fine with 2 pulsar 1 cards but when I add a cardI start having...

I got the new pulsar II card and installed it as board 1. Tried all kinds of configs and found one that works. Using the pulsar 1 borads adats, I put channels 1-16 on the the first pulsar 1 (board 2) and channels 17-24 on the second (board 3).. Then assigned 1-12 to borad 2 and 13-24 to board 3 and ...

I have 3 pulsar 1 cards in a system. I am using the 2449 mixer with 24 inputs coming from adat connections. All seems fine except some changes don't work. The project is using about 60% but if I change board id's for channels it changes but still not right. If I select 1-12 to board 1 and 13-24 as b...

As soon as someone sees a scope pro for 10 E, let me know- I will buy it.

1) I have 2 Pulsar 1 cards and have purchased a used pulsar 2 card (have not recieived it yet). Other than the 2 extra DSP's, are there any other hardware improvements in Pulsar 2? 2) what are the improvements/enhancements were made between scope 4.0 and 4.5? (still waiting for detalis on 5.0 of cou...

I agree with most of what you said, exept your PS. "ps: it cannot be done online for the simple fact that a smart a** just records the data traffic and analyses it. " The fact they have such a strong security system is the reason they should be able to use the internet. I could post all my...

I forgot to mention, I took the 3rd card back out and all started to work again.

I just added a third pulsar 1 card to my system which previously had 2 pulsar 1 cards for a total of 3. After adding the card, the 24/48 main outputs still works but none of the auxes or busses work.

Do I need to reinstall?

could a problem with the ribbon patch cable cause this problem?

Mark.

I am using 2, puslar cards with 4 dsps each. I am using the 24/48 mixer in a live setup. With 8 dsps I am right at the edge of not enough. A sope home would be enough more for me. So going from 8, to and equivenent 140 dsp isn't that big of a deal (Of course I would have logs of room for more effect...

I am guessing that basically what they did is take a 14 dsp card and upgrade to tiger shark dsps. Then convert pci bus to pcix and rack mount it. Device drivers would change but the sfp would probably be virtually unchanged. Seems like this is something creamware should have be working even before s...

Sounds great. Been wanting to use my system on a laptop for years. Couple of questions? Can you expand the io some how if you need more adat for example? Can you use older pulsar or scope products for this? What is xtdm? Is is compatable with stdm? OF course the big question, how much will it cost??

I have 2 old pulsar1 cards in a system. Running 4.0. If I leave the system running for about 24 hours, sfp will lock up consuming 100% cpu time. If I kill sfp, usually windows (xp) will crash within a couple of seconds. Not a big problem because I don't need the system running 24 hours a day but it ...

well, i finally got th demo downloaded. I loaded the mixer, routed 16 channels in from an adat source, he rountedthe outputsto an adat dets. I turned on the 4 auxes for ach channel and started getting errorsabout dsp usage.The dsp meter showed almost 100% usage. This mixer is way too cpu hungary for...

I have seen the but I cannot seem to access wolfs web sit to get the manual or the demos. I also have concern about the dsp usage. I currently use the 2448 for live use and make use of the 4 band eq and compressors on most of the channels. With my 2 pulsar 1 cards I am using about 70% of the dsp. I ...

Too rich for my blood. I guess I won't be doing any development. Can anyone tell me how difficutl this would be to implement. I am using the 2448 mixer for live use, using a Yamaha promix-01 as a control surface. The problem I am having is I can only configure 1 midi change for controllers in the mi...

Does this mean you need a 14 dsp card, or can you have 14 dsps on multiple cards?

I currently do not have the sdk but would like to do some development for my own use. I have sent repeated mails to Sonic Core asking about it but I get no reply.

I have 2 Pulsar cards (4 dsp each). Can I get the SDK or is it still limited to 13 dsp systems? If I can get it, how much does it cost?