PlanetZ forums - scopeusers.com

Ok, if you have done every possible tweak, then as last resource, is the RAM ok? Are you using approved RAM as stated on the HP web site? Is the RAM inserted inside the correct channels? I have found a support page where a user asks for RAM compatibility and the answer also explains where to insert ...

The HPET setting isn't there.

You can disable it from windows device manager, go to Device Manager > System Devices > High Precision Event Timer

right click and select "Disable" and reboot.

If you don't see it, it's because it's not enabled on your system.

Hi, can't talk for your specific motherboard and CPU, but it happened to me after updating the BIOS, that some previously disabled functionality switched back to on. So the system started to produce random clicks for no reason, then I checked inside the BIOS and virtualization was the culprit. After...

So I use loopmidi in parallel.
MidiOX is great for debugging Midi-stuff.
For the final setup, I remove MidiOX.

Good, I have pointed it out just to be sure you are aware of it

nebelfuerst wrote: ↑Wed Feb 19, 2020 9:46 am As some DAW do strange things, I use MidiOX to check the lowlevel midi ports.

Then XIte midi ports will be unavailable from DAW if MIDIOX is in the middle with those ports activated.

I have 4 entries for Xite midi, I have enable 2 midi port in the driver... So everything seem to be fine into the "software devices" and nothing is greyed. My latest idea is that those midi port from the previous Scope install might be in the prefs of the DAWs. will try that later. Yes, R...

How many Xite-1 midi do you have in that "software devices" list? I have 16 entries for the Xite, the name for all the software ports is "6 - MIDI" (my windows disk has been migrated to several hardware over the time) and if I check the properties I can see "Location on Sco...

to.: nebelfuerst Nothing change. It's the first time I tried to increase the number of midi port in the driver settings. Also I did open in Scope a total of 4 Sequencer Midi Source. But the DAWS only see 2 Midi sources. to.: djmicron None of the Scope drivers are greyed. Hi, if you are seeing dupli...

Hi, happened the same to me when I changed motherboard to the computer. To delete the dead entries: press “Win + X” and select “Device Manager” once Device Manager is opened, go to "View" menu and select “show hidden devices” expand the "Sound, video and game controllers" section...

Hi, more Ryzen 3000 compatible boards with 2 pci slots: Biostar X470gta ATX MSI B350 TOMAHAWK ATX Asus PRIME B350-PLUS ATX MSI B350 TOMAHAWK ARCTIC ATX Asus PRIME X370-A ATX MSI B350 GAMING PLUS ATX Be sure before buying one of those boards, that firmware is up to date for your Ryzen CPU, or you wil...

Hi if you can share the project, we can test it and try to reproduce your issue.

sorry, possibly the web archive server is under heavy load.

You can get my backup from here:

http://bit.ly/2TX7c3I

Hi, for the ones having missing dsp problems with Dadev devices, you need the dsplib package. It's still downloadable over archive.org from the following link:

https://web.archive.org/web/20050205223 ... dadev.com/


Extract the content inside the Scope dsp folder and you are ok.

Sal

dawman wrote: ↑Wed Jan 22, 2020 10:42 am Which Ryzen are you using if I may inquire?

A cheap Ryzen 3600, more than enough for a dsp based DAW

On my latest build based on Ryzen and Asus crosshair VII hero and windows 10, very rare clicks on wave source and no clicks on ASIO. My usual settings are 48 KHz and 6 ms ULLI and 32 channels of ASIO. I Also suggest to disconnect the wave source modules inside Scope when working with ASIO, because i...

Hi, some applications such as the ones based on libportaudio asio, can generate BSOD with scope asio driver. My simple workaround is to use Reaper's rearoute multiclient asio driver, set scope asio driver inside reaper and set rearoute asio driver from the buggy applications, then route the signal i...

MusicBee is also a media player that supports ASIO without the need of additional plug-ins. About the clicks, I only experienced them after Scope V5 on Windows 7 and 10 and since Scope V7 upgrade, I have to say that clicks are very rare and I noticed it was worst on LGA1155 platform until I upgraded...

hello just try and see how working linked asio scope with asio deus pro for me scope 5 work far better with this link 1024 samples latency is not a problem because i use protools HD for plugins and asio direct monitoring allow record without latency even at 1024 but when you plays vst at 1024 in sa...

Hello Samplitude is the best choice for scope better performence than: Sonar/cubase/protools with the same scope driver maybe ableton or bitwig better? but samplitude rock solid with scope/ asio deus link pro cheers Bitwig uses the portaudio asio driver which have bugs with many asio audio cards (s...

no I´m happy to read that. Holger is busy coding SCOPE 7.1, probably w/ very small amount of manpower,- and now S|C users think about helping MPA increasing range of devices by using SDK 5 or 7 they bought from S|C. Very sad IMO. Bud Don't know the DinoPark in deep, but as i can read on the web sit...