Search found 19 matches

by WAUXAR
Wed May 10, 2017 12:57 pm
Forum: Scope XTC
Topic: XTC Mode in combination with ableton live
Replies: 4
Views: 8199

Re: XTC Mode in combination with ableton live

Hi petal, In ableton just use instrument racks for your synths. In the rack you can configure which parameters to automate and after that map it to the macro knobs. It works for all the synths, also the prodessey. The benefit of this is that you can make multiple presets of a single synth. For examp...
by WAUXAR
Sat May 06, 2017 2:38 pm
Forum: Scope XTC
Topic: XTC Mode in combination with ableton live
Replies: 4
Views: 8199

XTC Mode in combination with ableton live

In "Scope XTC" not much is going on lately, so let's change this :) Last week I was thinking to let Ableton run with the XTC mode again, after purchasing the Push2. I have tried it before in the last 16 years, but not always it was a success, but now it's running steady for over a week now...
by WAUXAR
Sun Jan 16, 2011 4:43 am
Forum: Scope XTC
Topic: Ableton + XTC mode (not working)
Replies: 21
Views: 20203

Re: Ableton + XTC mode (not working)

In my case, ableton only crashes in xtc-mode when using more than one core.
by WAUXAR
Sat Jan 15, 2011 5:48 pm
Forum: Scope XTC
Topic: Ableton + XTC mode (not working)
Replies: 21
Views: 20203

Re: Ableton + XTC mode (not working)

After some reading here I found out why ableton is crashing.. it's because of the multicore processor... Now ableton is using a single core and it works fine..
No more crashes...
Thanx PlanetZ :)
by WAUXAR
Sat Jan 15, 2011 3:12 pm
Forum: Scope XTC
Topic: Ableton + XTC mode (not working)
Replies: 21
Views: 20203

Re: Ableton + XTC mode (not working)

Well vst automation works in ableton. When you load a synth, then rightclick a knob like filtercutoff or someting and give it a controllernumber (just like in sfp). Then click on configure (after expanding the device (below in ableton)) in the abletondevicewindow. When "configure" is click...
by WAUXAR
Thu Oct 14, 2010 9:26 pm
Forum: Problem Solving
Topic: Where to order a CW Ultra A16 powerswitch ?
Replies: 3
Views: 1110

Re: Where to order a CW Ultra A16 powerswitch ?

Well, I had contact with SC; sending it to them and let it fix was too expensive, because they also have to give warranty. They gave me a tip that it probably was the powerswitch which causes the problem (the ultra seemed to be dead). Last week a mate of mine checked the ultra and passed by the powe...
by WAUXAR
Thu Oct 14, 2010 5:20 pm
Forum: Problem Solving
Topic: Where to order a CW Ultra A16 powerswitch ?
Replies: 3
Views: 1110

Where to order a CW Ultra A16 powerswitch ?

Who can give me an answer ?
I have sent a mail to Soniccore, but they cannot tell where to get it.
Thanx in advance.
by WAUXAR
Sun Nov 22, 2009 2:18 pm
Forum: Tech Talk
Topic: Mobo advice asked for 3 scope professional cards
Replies: 7
Views: 2112

Re: Mobo advice asked for 3 scope professional cards

thnx for the replies :)
by WAUXAR
Fri Nov 13, 2009 11:17 am
Forum: Tech Talk
Topic: Mobo advice asked for 3 scope professional cards
Replies: 7
Views: 2112

Mobo advice asked for 3 scope professional cards

My old P4 finally died, so I need a new mobo and stuff. I have read a lot about mobo's here already, but I still haven't found where I'm looking for. My question is: Which mobo can handle 3 scope professionals boards ? Is there a mobo where the three big cards fit easily ? (without sata-connecters i...
by WAUXAR
Tue Sep 15, 2009 6:21 am
Forum: Scope XTC
Topic: STM 4896 in XTC-Mode WORKS!
Replies: 25
Views: 27078

Re: STM 4896 in XTC-Mode WORKS!

Hello... Since yesterday I'm trying to get the stm mixers to work in XTC-mode. I connected it just the way like Voidar's example. It seems to work, but one thing I don't understand; when adding synths in my DAW (Ableton 8 ), I hear them all playing, but the sound of all synths only goes thru mixer ...
by WAUXAR
Tue Sep 15, 2009 12:31 am
Forum: Scope XTC
Topic: STM 4896 in XTC-Mode WORKS!
Replies: 25
Views: 27078

Re: STM 4896 in XTC-Mode WORKS!

Hello... Since yesterday I'm trying to get the stm mixers to work in XTC-mode. I connected it just the way like Voidar's example. It seems to work, but one thing I don't understand; when adding synths in my DAW (Ableton 8 ), I hear them all playing, but the sound of all synths only goes thru mixer i...
by WAUXAR
Mon Feb 16, 2009 9:35 am
Forum: Problem Solving
Topic: A16 Ultra Faulty
Replies: 40
Views: 9727

Re: A16 Ultra Faulty

Hello, I was looking for information, because I've problems with my ultra a16 and jumped into this topic. I'm using the ultra a16 more than 5 years now and it always was my friend.. But, this week strange things occured. Yesterday the sync-led stayed orange... it was slave to one of my scopecards.. ...
by WAUXAR
Sun Sep 28, 2008 11:11 am
Forum: Problem Solving
Topic: pulsar 1 drivers ?
Replies: 8
Views: 1470

Re: pulsar 1 drivers ?

hello guys... I found the problem..... Because I had a luna2 installed before and my startup project still contained the zlinkconnection and other luna i/o, the pulsar1 was not visible yet. When I created a new project it became visible. The multimedia controller that wasn't installed according to d...
by WAUXAR
Sun Sep 28, 2008 10:33 am
Forum: Problem Solving
Topic: pulsar 1 drivers ?
Replies: 8
Views: 1470

Re: pulsar 1 drivers ?

are the cards connected via stdm-cable yet? yes have you rtfm concering the setup-ini file configuration? No I didn't. I thought that it isn't nessecary because if I put a luna into my system, it works at once. reinstall the driver, it is in the sfp 4.x download package for example I already reinst...
by WAUXAR
Sun Sep 28, 2008 10:00 am
Forum: Problem Solving
Topic: pulsar 1 drivers ?
Replies: 8
Views: 1470

pulsar 1 drivers ?

Hello, I have a little problem. I just bought a pulsar 1 card to join my 2 scope cards, just for the adat i/o. I bought it very cheap, no cd included etc. I thought, no problem, I have drivers for my own cards, they will probably work on the pulsar 1. But I can't manage to install the pulsar 1. In d...
by WAUXAR
Thu Sep 29, 2005 9:07 am
Forum: Scope XTC
Topic: XTC & Ableton
Replies: 18
Views: 8901

YESSS!!
it's working..
I'm a happy guy :smile:

thnx...
by WAUXAR
Thu Sep 29, 2005 7:27 am
Forum: Scope XTC
Topic: XTC & Ableton
Replies: 18
Views: 8901

To PETAL:

where do you change the ULLI settings inside XTC-mode in Live ? I can't find it..


thnx in advance

Sorry for asking... Already found it..
now I'm gonna try it... :smile:


<font size=-1>[ This Message was edited by: WAUXAR on 2005-09-29 08:56 ]</font>
by WAUXAR
Fri Aug 09, 2002 6:37 am
Forum: Problem Solving
Topic: WinXP/MatroxG450/SFP3.01A
Replies: 6
Views: 1820

Hello, the problem is solved already.. I thought I had the latest matrox G450 drivers, but that wasn't the case... Now, after updating the videocard-drivers, I have no problems with SFP anymore... :smile:
by WAUXAR
Thu Aug 08, 2002 9:16 am
Forum: Problem Solving
Topic: WinXP/MatroxG450/SFP3.01A
Replies: 6
Views: 1820

Hello, since I work with SFP I have a problem. It's got something to do with the display, the mouse is working very slowly, only in the SFP-environment. In the classic mode it is even worse. I heard someone saying it is a combination of using the SFP with matroxG450 dualhead videocard. Is that so an...