Search found 1739 matches

by Music Manic
Sat Feb 18, 2023 2:28 pm
Forum: Modular Talk
Topic: BC Modular Sync/Async
Replies: 1
Views: 2512

BC Modular Sync/Async

Hi guys

Could someone explain how to use the sync modules in BC Modular?
I want to us them for a stereo audio file or number of them and I believe Sync is used to keep things like audio in time.

Is there an in depth explanation of the modules?

Thanks
by Music Manic
Thu Feb 02, 2023 10:28 pm
Forum: Modular Talk
Topic: Drop-down menus
Replies: 4
Views: 1721

Re: StaticPath |Re: Drop-down menus

...modular folder? everything in one folder has pros and cons, hence my recommendation >> use the defaults during installation to keep the bindings! >> device will only load its associated prestfile if the path is stored. otherwise it has to be reloaded manually. >> You can also easily drag modular...
by Music Manic
Wed Feb 01, 2023 4:08 pm
Forum: Modular Talk
Topic: Drop-down menus
Replies: 4
Views: 1721

Re: StaticPath |Re: Drop-down menus

Scope XITE\App\Bin\cset.ini >check key [StaticPath] Modular=C:\Programme\SCOPE XITE/Modular Modules/ (path example to your modules) the path can disappeared after a few installations, then create it again manually. Ps.: Drop-Down-Menu module must drag+drop to modular window! one klick on module in ...
by Music Manic
Tue Jan 31, 2023 9:56 pm
Forum: Modular Talk
Topic: Drop-down menus
Replies: 4
Views: 1721

Drop-down menus

Hi Is it possible to get modules all in one place from the drop down menus? If I add 3rd party modules to the main modular folder it doesn’t see them when I load a modular shell. For instance could I have modules from modular I,II,III and IV plus Flexor available in the modular shell drop-down menu?...
by Music Manic
Thu Dec 29, 2022 8:35 pm
Forum: Tech Talk
Topic: Intel Xeon X3360
Replies: 3
Views: 1364

Intel Xeon X3360

Are these any good for audio use row an old machine; do they cause any complications

Thanks
by Music Manic
Mon Nov 07, 2022 7:50 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

valis wrote: Mon Nov 07, 2022 5:54 pm I will also add that the way people are wanting to use "pan" on a "stereo channel" or a source that begins as stereo, try using a plugin that gives you control via Mid/Side (M/S) and I think you'll get the effect you want.

This.
by Music Manic
Mon Nov 07, 2022 7:40 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

t's not so much that stereo files are bad, it's that panning is already done in a stereo file, probably the needed ambience to hear a stereo field is also already done in a stereo file. so, stereo files should be special effect files, like a whole drum kit or a solo piano, if the piano isn't part o...
by Music Manic
Sun Nov 06, 2022 3:34 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

garyb wrote: Sun Nov 06, 2022 2:48 pm
i know what panning does to a stereo field when mixing a lot of stereo files, it creates shit. that was an early lesson that nobody wants me to speak of.
This is my exact point and what I’ve just found out for myself. Thanks for the confirmation
by Music Manic
Sun Nov 06, 2022 11:10 am
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

there is reason for this. it's about music which before the present digital era was made by real people using real things. that's what ultimately excites the ears. the music, not the technicalities. of course, technicalities are important. but something that sounds cool to the ear always trumps &qu...
by Music Manic
Sun Nov 06, 2022 7:39 am
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

I think my point is that 'panning' implies a stereo bus, even if the source is a mono channel/signal. I've followed this thread and it's still unclear how/where the sum is being done as a mono (master bus) chain. when the source is mono and the signal is sent to a stereo bus, if the pan is centered...
by Music Manic
Sat Nov 05, 2022 4:00 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

Hi guys I've just tested a few things and it's not a phase problem. It's the architecture of how mixers are built. the Ableton mixer shows the same problem. If you phase one side of a stereo channel. Scope mixers or DAW ones it shows that there is just a 180 degree correlation between Left and Right...
by Music Manic
Tue Nov 01, 2022 5:51 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

Ok I’ll try with assigning some devices to DSP in the SDK.
Do you just assign the DSP and save the device or is there anything else I need to do?

Thanks again
by Music Manic
Tue Nov 01, 2022 5:39 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

if you assign a dsp id on the module attributes and save the device it should work. if a device is protected from editing in the sdk though the module attributes shouldn't be accessible. If I remember well in this case perhaps you can fold a device and assign the dsp for the container module. I sup...
by Music Manic
Tue Nov 01, 2022 2:43 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

Re: STM Mixer Stereo vs Mono

fra77x2 wrote: Tue Nov 01, 2022 2:12 pm have you tried manual assignent?
I didn’t think DSP assignment would affect a single channel’s phase fra77x2. I will try it though

Do you know how to lock devices using the SDK so that they will be locked when I use them? I’d appreciate it.
by Music Manic
Tue Nov 01, 2022 12:34 pm
Forum: Problem Solving
Topic: STM Mixer Stereo vs Mono
Replies: 37
Views: 2718

STM Mixer Stereo vs Mono

OK I'm a little confused. I think I may have asked this before but how does the Stereo channel behave relative to audio? I sent a sine wave to both the Left and Right of the stereo channel and I phased one side expecting it to cancel out and it didn't? I the did it with 2 Mono channels and it cancel...
by Music Manic
Wed Sep 01, 2021 1:46 pm
Forum: Purchasing and Trading
Topic: Pulsar I and Pulsar II prices
Replies: 2
Views: 1028

Pulsar I and Pulsar II prices

What is the going price for aPulsar I and Pulsar II now?

Thanks
by Music Manic
Sat Jun 26, 2021 4:05 pm
Forum: Tech Talk
Topic: PCI Express x1 to PCI/PCI-X Adapter Card
Replies: 26
Views: 6995

Re: PCI Express x1 to PCI/PCI-X Adapter Card

OK I'm going to try this out, I've ordered one of these PCI riser boards: https://www.ebay.co.uk/itm/255022730528 I've also modelled an external case for my two Pulsar IIs from bits I found on thingiverse: https://i.imgur.com/qFpmr9i.png https://www.tinkercad.com/things/l8xkVtFlF0h-sonic-core-pulsa...
by Music Manic
Tue May 04, 2021 12:35 pm
Forum: General Scope Discussion
Topic: Stereo Expander
Replies: 4
Views: 1145

Re: Stereo Expander

usually if it's mono compat then it's converted to m/s and any haas or other frequency based time-shifting is done only after decoding the 'side' back to L & R (M+S & M-S). Easy to tell the ones that are NOT mono compat... In the case of our Scope one I'm not sure but I'd be interested in a...
by Music Manic
Mon May 03, 2021 1:47 pm
Forum: General Scope Discussion
Topic: Stereo Expander
Replies: 4
Views: 1145

Stereo Expander

Hi Guys

What does the Stereo Expander do exactly to a stereo signal? Does it mix some of the left signal to the right and does it split mono and stereo information?

Seems to be mono compatible but I would appreciate knowing what it does exactly.

Thanks
by Music Manic
Sat Apr 10, 2021 11:41 am
Forum: General Scope Discussion
Topic: SCOPE PCI - how to ... ?
Replies: 8
Views: 1698

Re: SCOPE PCI - how to ... ?

garyb wrote: Sat Apr 10, 2021 7:27 am
i would NOT have v5.1 and v7 installs on the computer. you will certainly have problems when files get loaded from the wrong version.
Just put them in different folder locations