Hi guys
Could someone explain how to use the sync modules in BC Modular?
I want to us them for a stereo audio file or number of them and I believe Sync is used to keep things like audio in time.
Is there an in depth explanation of the modules?
Thanks
Search found 1739 matches
- Sat Feb 18, 2023 2:28 pm
- Forum: Modular Talk
- Topic: BC Modular Sync/Async
- Replies: 1
- Views: 2897
- Thu Feb 02, 2023 10:28 pm
- Forum: Modular Talk
- Topic: Drop-down menus
- Replies: 4
- Views: 2153
Re: StaticPath |Re: Drop-down menus
...modular folder? everything in one folder has pros and cons, hence my recommendation >> use the defaults during installation to keep the bindings! >> device will only load its associated prestfile if the path is stored. otherwise it has to be reloaded manually. >> You can also easily drag modular...
- Wed Feb 01, 2023 4:08 pm
- Forum: Modular Talk
- Topic: Drop-down menus
- Replies: 4
- Views: 2153
Re: StaticPath |Re: Drop-down menus
Scope XITE\App\Bin\cset.ini >check key [StaticPath] Modular=C:\Programme\SCOPE XITE/Modular Modules/ (path example to your modules) the path can disappeared after a few installations, then create it again manually. Ps.: Drop-Down-Menu module must drag+drop to modular window! one klick on module in ...
- Tue Jan 31, 2023 9:56 pm
- Forum: Modular Talk
- Topic: Drop-down menus
- Replies: 4
- Views: 2153
Drop-down menus
Hi Is it possible to get modules all in one place from the drop down menus? If I add 3rd party modules to the main modular folder it doesn’t see them when I load a modular shell. For instance could I have modules from modular I,II,III and IV plus Flexor available in the modular shell drop-down menu?...
- Thu Dec 29, 2022 8:35 pm
- Forum: Tech Talk
- Topic: Intel Xeon X3360
- Replies: 3
- Views: 1806
Intel Xeon X3360
Are these any good for audio use row an old machine; do they cause any complications
Thanks
Thanks
- Mon Nov 07, 2022 7:50 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
- Mon Nov 07, 2022 7:40 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
Re: STM Mixer Stereo vs Mono
t's not so much that stereo files are bad, it's that panning is already done in a stereo file, probably the needed ambience to hear a stereo field is also already done in a stereo file. so, stereo files should be special effect files, like a whole drum kit or a solo piano, if the piano isn't part o...
- Sun Nov 06, 2022 3:34 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
- Sun Nov 06, 2022 11:10 am
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
Re: STM Mixer Stereo vs Mono
there is reason for this. it's about music which before the present digital era was made by real people using real things. that's what ultimately excites the ears. the music, not the technicalities. of course, technicalities are important. but something that sounds cool to the ear always trumps &qu...
- Sun Nov 06, 2022 7:39 am
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
Re: STM Mixer Stereo vs Mono
I think my point is that 'panning' implies a stereo bus, even if the source is a mono channel/signal. I've followed this thread and it's still unclear how/where the sum is being done as a mono (master bus) chain. when the source is mono and the signal is sent to a stereo bus, if the pan is centered...
- Sat Nov 05, 2022 4:00 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
Re: STM Mixer Stereo vs Mono
Hi guys I've just tested a few things and it's not a phase problem. It's the architecture of how mixers are built. the Ableton mixer shows the same problem. If you phase one side of a stereo channel. Scope mixers or DAW ones it shows that there is just a 180 degree correlation between Left and Right...
- Tue Nov 01, 2022 5:51 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
Re: STM Mixer Stereo vs Mono
Ok I’ll try with assigning some devices to DSP in the SDK.
Do you just assign the DSP and save the device or is there anything else I need to do?
Thanks again
Do you just assign the DSP and save the device or is there anything else I need to do?
Thanks again
- Tue Nov 01, 2022 5:39 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
Re: STM Mixer Stereo vs Mono
if you assign a dsp id on the module attributes and save the device it should work. if a device is protected from editing in the sdk though the module attributes shouldn't be accessible. If I remember well in this case perhaps you can fold a device and assign the dsp for the container module. I sup...
- Tue Nov 01, 2022 2:43 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
- Tue Nov 01, 2022 12:34 pm
- Forum: Problem Solving
- Topic: STM Mixer Stereo vs Mono
- Replies: 37
- Views: 2869
STM Mixer Stereo vs Mono
OK I'm a little confused. I think I may have asked this before but how does the Stereo channel behave relative to audio? I sent a sine wave to both the Left and Right of the stereo channel and I phased one side expecting it to cancel out and it didn't? I the did it with 2 Mono channels and it cancel...
- Wed Sep 01, 2021 1:46 pm
- Forum: Purchasing and Trading
- Topic: Pulsar I and Pulsar II prices
- Replies: 2
- Views: 1071
Pulsar I and Pulsar II prices
What is the going price for aPulsar I and Pulsar II now?
Thanks
Thanks
- Sat Jun 26, 2021 4:05 pm
- Forum: Tech Talk
- Topic: PCI Express x1 to PCI/PCI-X Adapter Card
- Replies: 26
- Views: 7846
Re: PCI Express x1 to PCI/PCI-X Adapter Card
OK I'm going to try this out, I've ordered one of these PCI riser boards: https://www.ebay.co.uk/itm/255022730528 I've also modelled an external case for my two Pulsar IIs from bits I found on thingiverse: https://i.imgur.com/qFpmr9i.png https://www.tinkercad.com/things/l8xkVtFlF0h-sonic-core-pulsa...
- Tue May 04, 2021 12:35 pm
- Forum: General Scope Discussion
- Topic: Stereo Expander
- Replies: 4
- Views: 1205
Re: Stereo Expander
usually if it's mono compat then it's converted to m/s and any haas or other frequency based time-shifting is done only after decoding the 'side' back to L & R (M+S & M-S). Easy to tell the ones that are NOT mono compat... In the case of our Scope one I'm not sure but I'd be interested in a...
- Mon May 03, 2021 1:47 pm
- Forum: General Scope Discussion
- Topic: Stereo Expander
- Replies: 4
- Views: 1205
Stereo Expander
Hi Guys
What does the Stereo Expander do exactly to a stereo signal? Does it mix some of the left signal to the right and does it split mono and stereo information?
Seems to be mono compatible but I would appreciate knowing what it does exactly.
Thanks
What does the Stereo Expander do exactly to a stereo signal? Does it mix some of the left signal to the right and does it split mono and stereo information?
Seems to be mono compatible but I would appreciate knowing what it does exactly.
Thanks
- Sat Apr 10, 2021 11:41 am
- Forum: General Scope Discussion
- Topic: SCOPE PCI - how to ... ?
- Replies: 8
- Views: 1742